Beware the one eyed monster! |
Post Reply | Page <1 3456> |
Author | ||
The Builder
Old Croc Joined: 03 January 2010 Status: Offline Points: 3107 |
Post Options
Thanks(0)
|
|
I have the prototype and 186's, I'll try them at some point soon...
|
||
It just is.
|
||
kiriiz
Registered User Joined: 09 January 2009 Status: Offline Points: 70 |
Post Options
Thanks(0)
|
|
Plots plots plots :)
|
||
djyves
Young Croc Joined: 06 April 2009 Location: the Netherlands Status: Offline Points: 564 |
Post Options
Thanks(0)
|
|
here are some plots, I used the input parameters from darkmatter:
input screen: black is void v18-1000 and grey is pd186, (the fane 1000 is the same as v18-1000, at least i don't see any difference between the two) all drivers do reach xmax at 42 hz with 1000w, so anything above 42 hz under 1000w should be fine.
Edited by djyves - 14 June 2010 at 3:32pm |
||
"If brute force doesn't work, you're just not using enough!"
|
||
Saul
Old Croc Joined: 15 June 2007 Status: Offline Points: 5912 |
Post Options
Thanks(0)
|
|
really????? theyre fairly different drivers i was potentially planning 4 of these with the fane 1000
|
||
bitzo
Registered User Joined: 20 November 2007 Location: Italy Status: Offline Points: 977 |
Post Options
Thanks(0)
|
|
to me HR isn't good to predict this cab response.
Edited by bitzo - 14 June 2010 at 4:18pm |
||
Oscar
Registered User Joined: 22 April 2010 Location: Laredo, Tx Status: Offline Points: 100 |
Post Options
Thanks(0)
|
|
I'm not sure if I read your thought in parenthesis correctly, but XBL^2 isn't underhung, since it has multiple gaps http://www.acousticdev.com/Files/XBLDetails.pdf Edited by Oscar - 14 June 2010 at 5:21pm |
||
djyves
Young Croc Joined: 06 April 2009 Location: the Netherlands Status: Offline Points: 564 |
Post Options
Thanks(0)
|
|
I mean, I don't see an difference in the graph, but I will try again.
Edited by djyves - 14 June 2010 at 7:01pm |
||
"If brute force doesn't work, you're just not using enough!"
|
||
djyves
Young Croc Joined: 06 April 2009 Location: the Netherlands Status: Offline Points: 564 |
Post Options
Thanks(0)
|
|
here is a good graph of the fane 1000 vs void v18-1000:
the fane 1000 has a higher excursion around 60 hz, they both reach xmax with 1000w 41 hz
Edited by djyves - 14 June 2010 at 7:16pm |
||
"If brute force doesn't work, you're just not using enough!"
|
||
djyves
Young Croc Joined: 06 April 2009 Location: the Netherlands Status: Offline Points: 564 |
Post Options
Thanks(0)
|
|
black is fane 1000,
grey is v18-1000
|
||
"If brute force doesn't work, you're just not using enough!"
|
||
djyves
Young Croc Joined: 06 April 2009 Location: the Netherlands Status: Offline Points: 564 |
Post Options
Thanks(0)
|
|
at +/- 40 and 60hz the fane 1000 goes over xmax
the v18-1000 does not go over xmax at 60 hz
|
||
"If brute force doesn't work, you're just not using enough!"
|
||
bitzo
Registered User Joined: 20 November 2007 Location: Italy Status: Offline Points: 977 |
Post Options
Thanks(0)
|
|
akabak sim with b&c 18tbx100, eleven section, I take care of magnet diameter in order to reduce the 10th section.
|
||
TDA-Audio
Registered User Joined: 11 February 2005 Location: Russian Federation Status: Offline Points: 294 |
Post Options
Thanks(0)
|
|
my be ? recalculated 1x12" ? 2x12" ? |
||
horns plans http://photofile.ru/users/tda-audio/
|
||
Post Reply | Page <1 3456> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |