Speakerplans.com Homepage
Forum Home Forum Home > Plans > Ported Enclosures
  New Posts New Posts RSS Feed - G-SUB CUTSHEET
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

G-SUB CUTSHEET

 Post Reply Post Reply Page  <12345>
Author
Message
Adam_Iron_Horse View Drop Down
Old Croc
Old Croc
Avatar

Joined: 02 January 2010
Location: Scotland
Status: Offline
Points: 2043
Post Options Post Options   Thanks (0) Thanks(0)   Quote Adam_Iron_Horse Quote  Post ReplyReply Direct Link To This Post Posted: 20 February 2011 at 10:58am
Hey we started building to this cut sheet yesterday and have had a few problems with sizes...

I have measured all the sheets and they match this cutsheet so we havent cut it wrongly...

The baffle is too short we found that it needs to be 490mm wide by 500mm high.


Brace B are all too long they should be 500 unless you want them poking out the top of the box...

4xBrace C is too short to reach all the way across the box we had to cut another piece to fit in.

Mabye there we have not read this informationg right im not sure plesae feel free to rip this comment apart just don't want others to do the same as us and waste wood...
Back to Top
Adam_Iron_Horse View Drop Down
Old Croc
Old Croc
Avatar

Joined: 02 January 2010
Location: Scotland
Status: Offline
Points: 2043
Post Options Post Options   Thanks (0) Thanks(0)   Quote Adam_Iron_Horse Quote  Post ReplyReply Direct Link To This Post Posted: 21 February 2011 at 1:47pm
My bad just realised that the baffle is right size we didnt put the sides of the ports in when we put it together to see how it goes... thank that wasnt us putting it togetrher...


but Brace B and C are still funny... anyone else have that trouble?
Back to Top
Adam_Iron_Horse View Drop Down
Old Croc
Old Croc
Avatar

Joined: 02 January 2010
Location: Scotland
Status: Offline
Points: 2043
Post Options Post Options   Thanks (0) Thanks(0)   Quote Adam_Iron_Horse Quote  Post ReplyReply Direct Link To This Post Posted: 04 March 2011 at 10:46pm
sorry realised my mistakes forget my comments :)
Back to Top
nuclearbass View Drop Down
Old Croc
Old Croc
Avatar

Joined: 06 May 2010
Location: Rotherham
Status: Offline
Points: 9050
Post Options Post Options   Thanks (0) Thanks(0)   Quote nuclearbass Quote  Post ReplyReply Direct Link To This Post Posted: 31 August 2011 at 4:13pm
wicked thread this, any one like to make it idiot prrof and put a drawing up of how to cut all these outta 2 sheets cos the man @ b&q looked puddled after hed had the cut list most of the day, n i dont wanna get it wrong lol
one life - have fun!
Force fusion pro audio
Back to Top
Adam_Iron_Horse View Drop Down
Old Croc
Old Croc
Avatar

Joined: 02 January 2010
Location: Scotland
Status: Offline
Points: 2043
Post Options Post Options   Thanks (0) Thanks(0)   Quote Adam_Iron_Horse Quote  Post ReplyReply Direct Link To This Post Posted: 31 August 2011 at 5:08pm
I used a program called max cut pro for mine you just put in the dimensions of the sheets and quantityies and it puts it onto the sheet in optimum position

But for ease of the thread here is my cut sheet for one g-sub

Back to Top
nuclearbass View Drop Down
Old Croc
Old Croc
Avatar

Joined: 06 May 2010
Location: Rotherham
Status: Offline
Points: 9050
Post Options Post Options   Thanks (0) Thanks(0)   Quote nuclearbass Quote  Post ReplyReply Direct Link To This Post Posted: 31 August 2011 at 5:13pm
Wicked cheers...did u get it to all fit togethor in the end?
one life - have fun!
Force fusion pro audio
Back to Top
Adam_Iron_Horse View Drop Down
Old Croc
Old Croc
Avatar

Joined: 02 January 2010
Location: Scotland
Status: Offline
Points: 2043
Post Options Post Options   Thanks (0) Thanks(0)   Quote Adam_Iron_Horse Quote  Post ReplyReply Direct Link To This Post Posted: 31 August 2011 at 5:16pm
ye i did... It was stupid mistakes we made reading the plans and the cutlist....

The cutsheet should be fine but id check it over anyway... :P
Back to Top
Adam_Iron_Horse View Drop Down
Old Croc
Old Croc
Avatar

Joined: 02 January 2010
Location: Scotland
Status: Offline
Points: 2043
Post Options Post Options   Thanks (0) Thanks(0)   Quote Adam_Iron_Horse Quote  Post ReplyReply Direct Link To This Post Posted: 31 August 2011 at 5:17pm
just realised the numbers and the letters on the cutsheet dont match because i put the numbers in myself...
Back to Top
nuclearbass View Drop Down
Old Croc
Old Croc
Avatar

Joined: 06 May 2010
Location: Rotherham
Status: Offline
Points: 9050
Post Options Post Options   Thanks (0) Thanks(0)   Quote nuclearbass Quote  Post ReplyReply Direct Link To This Post Posted: 31 August 2011 at 6:52pm
Lol....i dnt have net acces at minute....ill have to wait to.sort it unless u fancy doing it :)
one life - have fun!
Force fusion pro audio
Back to Top
mrkaya View Drop Down
New Member
New Member


Joined: 23 November 2011
Status: Offline
Points: 1
Post Options Post Options   Thanks (0) Thanks(0)   Quote mrkaya Quote  Post ReplyReply Direct Link To This Post Posted: 23 November 2011 at 1:13am
Greetings ,

Do anyone can tell me why brace B is 541 ??? I dont really understand the quoatation for the brace (exept 60x500 for brace d)

Thank you very much !

Peace
Back to Top
speakergeek View Drop Down
Registered User
Registered User
Avatar

Joined: 13 March 2012
Location: Land of Oz
Status: Offline
Points: 20
Post Options Post Options   Thanks (0) Thanks(0)   Quote speakergeek Quote  Post ReplyReply Direct Link To This Post Posted: 13 March 2012 at 6:50pm
This is a great design and will be my very first build. I don't know why but I cannot read anything on the cut list. I don't have a computer right now and I'm using my Android to view this. I guess it's that but I gotta figure it out.
Thanks so much to the person that made this cut sheet. It's VERY helpful.
-Geek-
Back to Top
Dub Specialist Sound View Drop Down
Old Croc
Old Croc
Avatar

Joined: 15 November 2013
Location: Smethwick
Status: Offline
Points: 4873
Post Options Post Options   Thanks (0) Thanks(0)   Quote Dub Specialist Sound Quote  Post ReplyReply Direct Link To This Post Posted: 15 April 2015 at 9:19pm
why is my cut list diffrent to this one and orther on here? this isnt right some how

is this cut-sheet for butt joint?
Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE...
Back to Top
 Post Reply Post Reply Page  <12345>

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.06
Copyright ©2001-2023 Web Wiz Ltd.

This page was generated in 0.078 seconds.