how did this happen? |
Post Reply | Page 123> |
Author | |
soundguymatt
Young Croc Joined: 25 August 2009 Status: Offline Points: 688 |
Post Options
Thanks(0)
Posted: 14 March 2017 at 2:55pm |
Just in case you wanted a suggestion - I know the fane12-300 fitted in mine, I have them in there while I was waiting for the p-audio replacements.
|
|
--
Matt |
|
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Offline Points: 7441 |
Post Options
Thanks(0)
|
excellent contribution
indeed! |
|
nickyburnell
Old Croc Joined: 06 February 2005 Status: Offline Points: 4410 |
Post Options
Thanks(0)
|
|
|
It's everything, not everythink!
|
|
gezz-abba
New Member Joined: 13 March 2017 Location: Bochum, Germany Status: Offline Points: 6 |
Post Options
Thanks(1)
|
hi there,
its my first posting here and so sorry for exhuming this old thread. Maybe its still actual: Beyma SM212 will fit exactly into the cab of txd12m. Same screw hole diameter, same magnet diameter. . Sounds nearly the same, as the original turbosound ( p.audio ) driver. A tiny bit more pleasant in the lower mids around 500hz , when ringing out with SM58. I also changed the 25 microfarad condenser on the crossover network to 20mikrofarad. Gives less harsh sounding effect in upper midrange. Hope i could help, although a few years later.. . regards, arnt from germany.. |
|
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Offline Points: 7441 |
Post Options
Thanks(0)
|
they're on the shelf. haven't come across any other 12" drivers that fit them.
|
|
soundguymatt
Young Croc Joined: 25 August 2009 Status: Offline Points: 688 |
Post Options
Thanks(0)
|
What happened with your boxes in the end?
|
|
--
Matt |
|
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Offline Points: 7441 |
Post Options
Thanks(0)
|
they don't.
it's actually the top hat is stopping them from fitting.. and the way the top hats are mounted is a bit tricky... removing them may end up a bit destructive. not sure what to do really with them now.. could really do with them working again.. also have a pair of the bms12s320 now to do something with.. wondering if they'll work in a single smt cab.. |
|
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Offline Points: 7441 |
Post Options
Thanks(0)
|
i dont think it's just physical trauma. that's 4 of these turbo drivers in these cabs i know of ending up like this. my 2 (different incidents), one belonging to the guy i bought the boxes from, and one on psw someone mentioned.
anyway. gonna see how the replacements go.. if they fit. |
|
mrspeedy
Young Croc Joined: 23 July 2011 Location: Cambridge UK Status: Offline Points: 511 |
Post Options
Thanks(0)
|
Thats because the only magnet on a Soundlab is similar to that of a souvenir fridge magnet from Malawi.
|
|
Dub Specialist
Old Croc Joined: 30 December 2011 Location: Smethwick Status: Offline Points: 3230 |
Post Options
Thanks(0)
|
stick to Sound Lab dont happen to them..lol
|
|
wayward91
Young Croc Joined: 15 July 2010 Location: Leeds/Mancester Status: Offline Points: 676 |
Post Options
Thanks(0)
|
not sure if this was regarding my post but if its is , i left a small detail out. its a diddy rcf monitor 8 i have made a pole mount adaptor for them and used them to do a small pub event (very small pub) . Edited by wayward91 - 07 January 2012 at 3:38pm |
|
service dept Steve
Old Croc Joined: 30 January 2010 Location: S.W.London Status: Offline Points: 2034 |
Post Options
Thanks(0)
|
Sorry to barge in but the clue was at the beginning, This is from a monitor and so therefore it is simple: it has been dropped off the stage. No hot, no overdrive, no distorted signal, just deceleration trauma. Find out who was in charge and give them the bill.
|
|
We are not "They", We are "The others"http://www.servicedept.co.uk -
|
|
Post Reply | Page 123> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |