Ass RX18 - PD1850 series 1 vs Oberton 1500 Test

The rx is a lovely box but I believe also the throat is too small which is why a lot of drivers struggle choke in there and also some drivers get very hot in there too, they shift massive amounts of air but 10m back it does drop off very quickly,at motion the bnc neo did go pop in there no clipping or nasty just could not take the same continuous power as 1850",I do a lot of hire outs for drum and bass not all sound system jerk it for a bit and come down,the drivers are running for 5 to 6 hours at 800,900w,and the neo could not take that as well as the 1850s,having owned rx,s118,shortman full,noise control full,Larry and Steve b 1850 loaded and many other drivers tryed,fans xb,pd186,fane b,beyma g550,bnc neo,turbo max 1000 and 1200',pd 1851 and 52 can say this with running experience not "I heard a sound running these experiences"correct Hpf etc was used , just my findings,

Edited by paulus - 29 November 2015 at 5:08pm

Yes it was in the standard rx 18 , not only tested we ran 6 rx18 loaded with them for a while ,accurate driver tho always wanted to try it in a reflex design but never happened