Passive Mod |
Post Reply |
Author | |
nickyburnell
Old Croc Joined: 06 February 2005 Status: Offline Points: 4410 |
Post Options
Thanks(0)
Posted: 08 February 2017 at 1:22pm |
Hi, below is a pic of a 2.2k x over from an NJD cab. I'm using same hf, CDXi1545 but slightly more efficient 15. The top is a fraction too, "dumbed down". Not a lot, just a bit. Blue and brown wire go to top. Am I right in thinking if I lose one of the double stacked resistors I might gain a little?
Thanks as always |
|
It's everything, not everythink!
|
|
dlyxover
Old Croc Joined: 14 June 2007 Location: Liverpool Status: Offline Points: 1508 |
Post Options
Thanks(1)
|
You don't need to loose a resistor you need to replace both resistors in the l pad to give less attenuation.
below is a link with some useful info and a list or resistor values |
|
In the Truth there is no news, and in the News there is no truth
|
|
odc04r
Old Croc Joined: 12 July 2006 Location: Sarfampton Status: Offline Points: 5483 |
Post Options
Thanks(0)
|
It looks like a pretty basic 12db/slope LC xover but the resistors could be wired in several ways. Could you draw out the diagram of the circuit with component values and then I could give you an exact answer.
|
|
nickyburnell
Old Croc Joined: 06 February 2005 Status: Offline Points: 4410 |
Post Options
Thanks(0)
|
Will do
|
|
It's everything, not everythink!
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |