SUB B&C12NW100 or similar- Horn |
Post Reply |
Author | |
adamkaktus
New Member Joined: 27 September 2010 Location: Warsaw Status: Offline Points: 4 |
Post Options
Thanks(0)
Posted: 27 September 2010 at 7:56pm |
Has anybody build Horn or Band-pass enclosure for B&C 12" speakers? I'm interested in 12NW100 project, This speaker has very good parameters, but in B-R box it's not very effective, only 96dBSPL
If anybody has built it-please send some info.
Thanx
Adam Edited by adamkaktus - 27 September 2010 at 7:57pm |
|
ceharden
The 10,000 Points Club Joined: 05 June 2005 Location: Southampton Status: Offline Points: 11776 |
Post Options
Thanks(0)
|
I think I tried some simulations at some point and found it would work in the Punisher horn. Worth investigating.
|
|
adamkaktus
New Member Joined: 27 September 2010 Location: Warsaw Status: Offline Points: 4 |
Post Options
Thanks(0)
|
allright, but is there any 12"version? I want it to be 12"because of mobility, and limited transport options.
|
|
adamkaktus
New Member Joined: 27 September 2010 Location: Warsaw Status: Offline Points: 4 |
Post Options
Thanks(0)
|
I'm was reading some posts on this forum, and i found that TH-mini is suitable for this speaker, is that right? I have some doubt about TDA's plans, because it's told that for 12" i should make identically cab like for 15", only width has to be 38cm, but i suppose also hole for speaker should be smaller,than what with other diameters? Edited by adamkaktus - 28 September 2010 at 1:41pm |
|
darkmatter
Old Croc Joined: 26 February 2005 Location: LDN Status: Offline Points: 2425 |
Post Options
Thanks(0)
|
Yes, the hole for the speaker would have to be cut for a 12" driver if you're using a 12" driver. Otherwise it will fall through the hole.
|
|
adamkaktus
New Member Joined: 27 September 2010 Location: Warsaw Status: Offline Points: 4 |
Post Options
Thanks(0)
|
I know, i know. Did i foud it properly that it was made in 15mm board? I'm wondering how much it cost, and how difficult to find somebody to cut it for me. I saw somewhere that 12" version weights onlu about 30kG, which is very, very good result, is that true?
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |