Traktor Audio 6 |
Post Reply |
Author | |
Absulum
Registered User Joined: 01 February 2012 Location: Sheffield Status: Offline Points: 267 |
Post Options
Thanks(0)
Posted: 07 June 2013 at 6:08pm |
Hi,
Hope this is the right place to post this... Basically i use Traktor Audio 6 with Traktor scratch pro 2. Very occasionally halfway through a set there will start to be digital distortion, coming from all the outputs that have anything playing. It starts as barely noticeble, but increases over about 2 or 3 minutes, until the track is completely inaudible. Luckily so far its never happened during a gig, but need to get it sorted before it does! Has anyone experienced this? It goes back to normal after restarting traktor... Cant seem to find any pattern in it either. Can happen straight away or after a few hours of use, and has happened in a few different locations. Seems like a software issue, but it never does it when using a MIDI controller. Any suggestions? Cheers :)
|
|
jacethebase
Old Croc Joined: 23 September 2009 Location: Somerset Status: Offline Points: 5699 |
Post Options
Thanks(0)
|
I would expect its a time coding issue. Probably the signal not being strong enough just out of interest are you using the Traktor multicore cable? I had issues with that also. Went on to singles and solved it.
|
|
www.wedding-production.co.uk
www.stage2sound.com |
|
MSS
Registered User Joined: 31 July 2010 Status: Offline Points: 184 |
Post Options
Thanks(0)
|
There is a firmware update on the native instruments website. That may fix the problem.
|
|
jammin75
Old Croc Joined: 08 July 2012 Location: west midlands Status: Offline Points: 2375 |
Post Options
Thanks(0)
|
i use a traktor 2 i had a similar problem i disabled power management on the usb ports been fine ever since
|
|
feel the vibes !!! "Who Feels it Knows it" Strong like Lion
|
|
Absulum
Registered User Joined: 01 February 2012 Location: Sheffield Status: Offline Points: 267 |
Post Options
Thanks(0)
|
Cheers. Just done the firmware update. Im on mac and dont think you can disable USB power management... And no not using multicore, signal strength from the timecodes is OK, often use direct through for playing vinyl and its fine for that too. Problem is i wont know for certain wether anything has fixed it, as the problem happens so rarely! If it happens again after the firmware update i'll report back :P |
|
djkeet
Registered User Joined: 26 December 2011 Location: England Status: Offline Points: 462 |
Post Options
Thanks(0)
|
I use Serato and sometimes its just best to check the relevant forum.
Also you can do an A.B.C Chart A.What happened before,what were all your settings ie including non essential services running B.What actually happened when things became inaudioble C.What did you do to resolve it. No matter how long it takes you will see a pattern emerging a bit crude but your still providing structure to problem solving. Edited by djkeet - 08 June 2013 at 12:31pm |
|
Soundbite
|
|
johnatron
Registered User Joined: 18 November 2008 Location: Lancashire Status: Offline Points: 157 |
Post Options
Thanks(0)
|
I had alsorts of issues with traktor and my shitty dell 1545 laptop on Windows 7
never had a single issue on my macbook pro, highly recommended if you got the cash. I have got the dell working fully with no problem now tho, Just follow the video tutorials on the link below: will sort it right out mate John Edit: Sorry thought you were on a Windows, I use macbook pro and never had a single issue could maybe try reinstalling traktor if you havent allready
Edited by johnatron - 08 June 2013 at 6:09pm |
|
Absulum
Registered User Joined: 01 February 2012 Location: Sheffield Status: Offline Points: 267 |
Post Options
Thanks(0)
|
cheers yeah im on Macbook pro, not the best but should be fine,4gb ram and 2.4Ghz processor, and not running at particularly low latancy or high sample rate either...
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |