Tapped Horn Coupling - Cyclops |
Post Reply | Page <12 |
Author | |
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7810 |
Post Options
Thanks(0)
|
it will go lower at a spl sacrifice.
|
|
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|
nickyburnell
Old Croc Joined: 06 February 2005 Status: Offline Points: 4410 |
Post Options
Thanks(0)
|
Not good at kick? That as Staips remit in the original post, to eliminate the need for kick. One I did kicked like a mule with Fane Prime.........Driver choice/mine not extended version?
Edited by nickyburnell - 25 February 2017 at 10:30am |
|
It's everything, not everythink!
|
|
MattStolton
Old Croc Joined: 04 September 2010 Location: Walthamstow Status: Offline Points: 4234 |
Post Options
Thanks(0)
|
Look at the HR plot. Hump at 91, and not good at kick?
In multiples looks to be good to 120-150Hz?
|
|
Matt Stolton - Technical Director (!!!) - Wilding Sound Ltd
"Sparkius metiretur vestra" - "Meter Your Mains" |
|
cookie-dj
Young Croc Joined: 09 May 2014 Location: Warwickshire Status: Offline Points: 977 |
Post Options
Thanks(0)
|
Extended or normal?
|
|
You can't polish a turd!
|
|
nickyburnell
Old Croc Joined: 06 February 2005 Status: Offline Points: 4410 |
Post Options
Thanks(0)
|
Multiples it is then. Bit weird, as design brief was deffo to avoid kicks, I know this because it came directly from me doing an 18 Micro Hog and moaning. Thread below. I built only one and tested thoroughly with a Fane. Know what I heard, so gonna say HR not correct in my opinion https://freespeakerplans.com/forum/7-general-forum/8742-beware-the-one-eyed-monster Cab was a very loud, high attack, smooth (almost too smooth) success. Used in a field round here, and indoors. They are a bitch to build and use a lot of wood but go up to 120 with ease. Actually nicer 120 than a reflex IMO To quote Bitzo from the above thread this cab is so complex, HR isn't good in this case. However here's an akabak sim b&c 18tbx100 loaded, composed by eleven section, I take care of the magnet diameter in 10th section. Great cab, I'm very curious to listen it someday. |
|
It's everything, not everythink!
|
|
toastyghost
The 10,000 Points Club Joined: 09 January 2007 Location: Manchester Status: Offline Points: 10920 |
Post Options
Thanks(0)
|
Most tapped horns are meant to be low passed below 100Hz - the design often has an increase in distortion and a peak above that.
|
|
Sypa
Young Croc Joined: 21 February 2013 Location: Croatia Status: Offline Points: 920 |
Post Options
Thanks(0)
|
I have two bought from the man himself,now are permanently installed in one place. Although they play to 150ish there i prefer them with a 90hz highpass. Also used em as kicks over scoops once,wasnt bad at all actually. Dunno they can play the kick for sure but the sound of em doing it is questionable and a matter of taste.
|
|
Post Reply | Page <12 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |