Ideal settings for PD154 loaded HD's on the DCX? |
Post Reply |
Author | |
tekcsedi
Registered User Joined: 25 November 2015 Location: Romania Status: Offline Points: 24 |
Post Options
Thanks(0)
Posted: 28 December 2015 at 7:31pm |
Finally my drivers and boxes are on their way to me and should be here in a few days,so I decided to start researching for the correct settings.
Other than the fact that I need a 50hZ low pass, I can't find much else. Anybody with experience can chime in regarding this?
|
|
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Offline Points: 7442 |
Post Options
Thanks(0)
|
50hz high pass, not low pass. can run them up to about 150hz.. any other setting will be dependent on what speakers you have above and below.
|
|
tekcsedi
Registered User Joined: 25 November 2015 Location: Romania Status: Offline Points: 24 |
Post Options
Thanks(0)
|
Nothing below,and some generic reflex tops above.
Any other advice? |
|
njw
Old Croc Joined: 26 March 2010 Location: S. Wales Status: Offline Points: 2574 |
Post Options
Thanks(0)
|
If you're using at least four HD's in a stack you may get away with high passing a little lower, say 45hz, also, if you have reflex tops above then they may need a delaying to the HD's to get everything coherent and 'punchy'.
|
|
tekcsedi
Registered User Joined: 25 November 2015 Location: Romania Status: Offline Points: 24 |
Post Options
Thanks(0)
|
Great!
Thanks to both of you for the solid advice. |
|
el chupacabra
Young Croc Joined: 02 August 2006 Location: United Kingdom Status: Offline Points: 757 |
Post Options
Thanks(0)
|
It's been a few years but I recall the delay length from reflex to HD15 being about 70cm, you can set this on the tops in your DCX.
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |