Speakerplans.com Homepage
Forum Home Forum Home > General > Advanced Discussion
  New Posts New Posts RSS Feed - 4 ways mono setup
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

4 ways mono setup

 Post Reply Post Reply
Author
Message
rayrainx View Drop Down
Registered User
Registered User
Avatar

Joined: 27 December 2016
Location: nigeria
Status: Offline
Points: 46
Post Options Post Options   Thanks (0) Thanks(0)   Quote rayrainx Quote  Post ReplyReply Direct Link To This Post Topic: 4 ways mono setup
    Posted: 27 December 2016 at 9:30pm
yes my name is rainx.I need help setup a gear to play in four ways mono (FOH) and two ways stereo for the surround.here is my speakers.I hope I can gibe a detail list.for the FOH (8 subs) 18'long throw scoops- 1000w each fane collusos 18xb
                 (8 subs) 15'folded horn kick beans 500w each.            (8 mids) 15 long throw precision device 500w each.       (8 highs) 1'compression driver 25 watts each.       
I have two pxm1450 to drive the scoope,
two american audio v6001 to drive the top bass
and two behringer ep4000 to drive the mids
and also two citronic Ppx 900 to drive the compression drivers

for processors, I have a dbx driverack pa+
and a behringer 4 ways mono cross over
also a graphic eq and also an ultramiximiser

the thing is I don't know what processor to use,also the best crossover points for best sound
Back to Top
Brutus View Drop Down
Registered User
Registered User


Joined: 27 November 2015
Location: Utrecht,Holland
Status: Offline
Points: 101
Post Options Post Options   Thanks (0) Thanks(0)   Quote Brutus Quote  Post ReplyReply Direct Link To This Post Posted: 28 December 2016 at 10:49am
a driverack pa+ = 3 way stereo , where you could xover / delay / eq etc.
the behringer 4 way xover, is a 2x2 xover as well?

and then u have a selection boxes:

8x 18 inches subs
8x 15 inches subs

8x 15 inch mids
8x 1 inch highs


to make it very simple, the smallest driver, creating the highest frequencies, needs the most delay to match up with the biggest/slowest drivers.

so use the DBX for a 3 way setup = 15 inch sub / 15 inch mid / 1 inch high
if the 18 inch only needs xover, you could try to setup the AA6001 (internal xover)
otherwise use the behringer xover for the 18 inch subs.


i dont get what kind of setups u want, 4 way and 2 way ?
if i look at your processors, i would reccomend to say, use a 2 way setup if that is possible with the berhinger (2 way stereo) and a 3 way setup with the dbx.

for that 2 way setup? i would use 15/1
or if that topcab? could be passive : 15/15/1

for that 3 way setup i would say : 18/15/1

makes live easy.


Back to Top
 Post Reply Post Reply

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.06
Copyright ©2001-2023 Web Wiz Ltd.

This page was generated in 0.063 seconds.