desapointed |
Post Reply |
Author | |
Junior253
Registered User Joined: 08 September 2015 Status: Offline Points: 46 |
Post Options
Thanks(0)
Posted: 29 April 2017 at 7:31am |
Hello all
I work currently on a top project 2-way Here's what I calculate on A B E C for a simple horn in theory if I divide it in two horn I should find the same result but I don't fall on my foot can you me enlighten to it you please also another simulation on akabak calculate en double horn and abec legend in green 1w/m and and I'm also looking for someone who knows how to use abec et vacs i wait for your response best regard Junior Edited by Junior253 - 29 April 2017 at 7:32am |
|
bee
Old Croc Joined: 14 June 2011 Location: Middlesex Status: Offline Points: 4553 |
Post Options
Thanks(1)
|
I would double check your data inputted into abec, it predicts better, but also is very unforgiving, if your data entered is slightly off...
it also looks like some sort of cancelation is going on. there is a small closed group I belong to on fb, were only abec is discussed, and we share open ideas. and problem solve.
|
|
https://www.elements-audio.com
|
|
Junior253
Registered User Joined: 08 September 2015 Status: Offline Points: 46 |
Post Options
Thanks(0)
|
yes i'm interessed
|
|
Junior253
Registered User Joined: 08 September 2015 Status: Offline Points: 46 |
Post Options
Thanks(0)
|
I send you a PM
|
|
sgarfa
Registered User Joined: 10 December 2013 Status: Offline Points: 101 |
Post Options
Thanks(0)
|
In akakak you have set the drivers position, and in general the Physical dimensions and positions of the elements in the box? ... maybe you did not consider some refractions .. i use comsol integrated with inventor to have no doubts regarding geometries
Anywai abec3 is a vary great simulator, especially from those who like me come from akabak ps:since you're using a good 3D model, you may already analyze a phase plug so ridice the front volume of the mid-woofers and increase the top respose and control the directivity .... or you use a coaxial driver?
Edited by sgarfa - 12 May 2017 at 9:14am |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |