tse211 crossover
Printed From: Speakerplans.com
Category: General
Forum Name: Electro Frying Forum
Forum Description: Talk about drivers, processors and mixers
URL: https://forum.speakerplans.com/forum_posts.asp?TID=97343
Printed Date: 18 April 2024 at 6:05pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: tse211 crossover
Posted By: mikelink
Subject: tse211 crossover
Date Posted: 19 December 2016 at 10:39pm
| hi, i want to build a passive crossover for my tse211, are there some plans online? |
Replies:
Posted By: cookie-dj
Date Posted: 20 December 2016 at 4:23am
you will ruin a TSE111 with a passive crossover. best to bi-amp it  ------------- You can't polish a turd! |
Posted By: James Tengo
Date Posted: 20 December 2016 at 10:48am
| Call the farm, I bet you they still have their notes on them |
Posted By: mikelink
Date Posted: 20 December 2016 at 1:28pm
| i know but i have only a lms-d6 and i would like to go 3 way stereo, aside from the original passive crossover, what components could i use to stay close to the original one? |
Posted By: mikelink
Date Posted: 20 December 2016 at 1:38pm
|
http://www.diyaudioandvideo.com/Calculator/SpeakerCrossover/" rel="nofollow - http://www.diyaudioandvideo.com/Calculator/SpeakerCrossover/ found this on the internet, also i'd like a volume knob for the hf drivers like on tms2, is that possible? |
Posted By: cravings
Date Posted: 20 December 2016 at 1:44pm
| What else have you got? D6 will do 3 way stereo a side.. |
Posted By: mikelink
Date Posted: 20 December 2016 at 5:25pm
| 4 hogs and 4 tse215 |
Posted By: cravings
Date Posted: 20 December 2016 at 5:41pm
| You can run hogs in mono, tse215 in mono, then mid and high in stereo. Are you running the tse up to 250? Are they actually tse215, or the older angular ones? |
Posted By: mikelink
Date Posted: 20 December 2016 at 7:13pm
| they are 4 tms3 splitted |