Yet another HD15....my first one.

Hello dear forum friends.
This is my first build of my first HD15,loaded with an Eminence Delta15LFA that i had in another homebuilt cab that was useless.This is my first time i post pictures too so i hope it will work.
I wanted to keep everything about the cab as per original design,with only downside that i made it in 19mm MDF.I recently found an online woodshop on web here in Italy that cut and ship 18birch ply,so i already ordered the wood for my first X1 build.I hope i will get some budget to change the Eminence with an PD154 and to get a new Void for the X1 aswell. I hope some of you can comment on the pictures and let me know what i done wrong and how i can improve my work.



_

_

_

_

_

_
_

_

Yes the first photo was just to test the measure of the driver.The handles are out of plastic material and i bolt them and closed all the air with hot glue inside.My plan is to build 3 more and 2 X1's.I will use them outdoors for small crowds of people for private parties.

Artical Kulcha wrote:   its hardboard yeah? shoudnt you have used 4mm ply its alot stiffer panel or maybe 2x4mm built up and glued ect..

 

_

_

_

_

Well for home usage the Technics does a good job on mid-high.Can't push it more than 50W but is plenty in my room for testing purposes.