G sub loaded RCF LF18X451

Does anyone know if G Subs loaded with RCF LF18X451 drivers would maybe sound good? Here's the drivers :

http://www.rcf.it/products/precision-transducers/low-frequency-transducers/lf18x451

I'm wanting to have two dual 18" subs built with those drivers, thanks.

I've got WinISD but i'm not that good at working it out plus I don't know the internal volume of the G Sub (taking into account bracing, drivers etc..)

I'd need to know exactly really in litres, thanks.


Edited by djteknovibe - 23 June 2016 at 4:09pm

Thanks, I worked it out as 265.53 litres but the calculation doesn't take into account rectangular slotted ports and doesn't take into account more than one brace, the G Sub has 4 braces, one running horizontal and 3 running vertically. With these rough calclations do I just put about 265 litres into WinISD?

I'm giving up because the enclosure is too hard to work out because as the standard enclosure goes the port isn't big enough for two RCF LF18X451 drivers to work at their best. I've tried changing the port size but then it'd mean the enclosure dimensions would be different to the G Sub plans which then makes the whole thing more technical.

I honestly don't think i'm mentally able to get my head round designing an enclosure for two RCF LF18X451 drivers, I just thought they might work wonderfully in the G Sub but obviously not.