Wifi remote controller for the Ultradrive |
Post Reply | Page <1234 13> |
Author | |
Risc_Terilia
Young Croc Joined: 15 December 2007 Status: Offline Points: 689 |
Post Options
Thanks(0)
|
There's a bit of space inside the DCX's case, I wonder if these components could be mounted in there?
|
|
Lasse Lukkari
Young Croc Joined: 09 March 2004 Location: Finland Status: Offline Points: 615 |
Post Options
Thanks(0)
|
There is plenty of space inside it. The microcontroller has an onboard pcb antenna. If it's put inside a metal enclosure an external antenna would be required.
Edited by Lasse Lukkari - 24 January 2018 at 5:04pm |
|
colinmono
Young Croc Joined: 10 October 2007 Location: Midlands UK Status: Offline Points: 1111 |
Post Options
Thanks(1)
|
Great work! Would love to give this a try if I can find time.
|
|
Lasse Lukkari
Young Croc Joined: 09 March 2004 Location: Finland Status: Offline Points: 615 |
Post Options
Thanks(0)
|
I'm planning to order a pcb from china to make the setup a bit more straightforward to put together.
This needs a bit mode cleanup but here is the pcb layout I drew today. It's using only through hole components. Edited by Lasse Lukkari - 26 January 2018 at 4:03pm |
|
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7810 |
Post Options
Thanks(0)
|
I would by this as a full functioning unit.
Hit me a PM.
|
|
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|
immortal
Registered User Joined: 07 January 2013 Location: Sheffield Status: Offline Points: 460 |
Post Options
Thanks(1)
|
Very nice. I did something similar a few years ago with a raspberry pi for my final year project but it was no where near as nice as this haha.
|
|
Cemetery Sounds
|
|
Lasse Lukkari
Young Croc Joined: 09 March 2004 Location: Finland Status: Offline Points: 615 |
Post Options
Thanks(0)
|
Thanks for the Github star!
|
|
Lasse Lukkari
Young Croc Joined: 09 March 2004 Location: Finland Status: Offline Points: 615 |
Post Options
Thanks(0)
|
I will. I just ordered the first prototype batch of the circuit boards. They should arrive before the end of next week.
Edited by Lasse Lukkari - 26 January 2018 at 6:14am |
|
RoadRunnersDust
Young Croc Joined: 03 December 2013 Location: United Kingdom Status: Offline Points: 560 |
Post Options
Thanks(1)
|
Following 👌🏻
|
|
Lasse Lukkari
Young Croc Joined: 09 March 2004 Location: Finland Status: Offline Points: 615 |
Post Options
Thanks(1)
|
Already working with next iteration of the board. This can be screwed directly to the RS232 terminal. The board is standing vertically to avoid torque. Now there is also a connector for an external DC PSU. Too bad the whole China is on a holiday for next three weeks or so.
Can't be arsed to check the rx/tx polarity. It can be changed programmatically if it's the other way around. Last time just thinking about it gave me a headache. Ground plane would most likely simplify the board.
Edited by Lasse Lukkari - 04 February 2018 at 5:52pm |
|
JonB67
Young Croc Joined: 22 April 2016 Location: UK Status: Offline Points: 1376 |
Post Options
Thanks(1)
|
Im interested in this too now I've ordered a dcx!
Looks fantastic. |
|
Risc_Terilia
Young Croc Joined: 15 December 2007 Status: Offline Points: 689 |
Post Options
Thanks(0)
|
Is it going to be a kickstarter type thing?
|
|
Post Reply | Page <1234 13> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |