Odd scoop question |
Post Reply | Page 12> |
Author | |
tkroeker
Registered User Joined: 06 November 2015 Location: kansas Status: Offline Points: 101 |
Post Options
Thanks(0)
Posted: 08 February 2018 at 7:51am |
Does anyone have pics or info on how you ran wire? i.e. from the back to the front and screw hardware to the side walls...lol
I know it should be self explanatory but rattle is what I'm concerned about and the logical way just seems so odd. Just got in 4 Dayton PA465's and Excited Thanks
|
|
Dub Specialist Sound
Old Croc Joined: 15 November 2013 Location: Smethwick Status: Offline Points: 4873 |
Post Options
Thanks(0)
|
Seen/had/built nuff scoops over the years , thick ,thin baggy tight cable, never heard cable rattling tbh
seen ppl use cable clips to pin down cable, drill hole in rear baffle str8 to driver nothing realy to be conserned about
|
|
Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE...
|
|
tkroeker
Registered User Joined: 06 November 2015 Location: kansas Status: Offline Points: 101 |
Post Options
Thanks(0)
|
Hmmm, drill and straight through instead of zig zag up and down.
Awesome.
|
|
Dub Specialist Sound
Old Croc Joined: 15 November 2013 Location: Smethwick Status: Offline Points: 4873 |
Post Options
Thanks(0)
|
Yes bro, seen it loads of times,
then it tends to less baggy cable in the front chamber then tbh
|
|
Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE...
|
|
tkroeker
Registered User Joined: 06 November 2015 Location: kansas Status: Offline Points: 101 |
Post Options
Thanks(0)
|
you rock, Thanks.
|
|
odc04r
Old Croc Joined: 12 July 2006 Location: Sarfampton Status: Offline Points: 5483 |
Post Options
Thanks(0)
|
Drill the hole as close to the cable diameter as you can and seal around it well with silicone. Else pressure will find a way (out)
|
|
sn95
Registered User Joined: 10 March 2013 Location: USA Status: Offline Points: 351 |
Post Options
Thanks(0)
|
I hate to be the bearer of bad news but the PA465 is not a good drive especially for a scoop.
|
|
tkroeker
Registered User Joined: 06 November 2015 Location: kansas Status: Offline Points: 101 |
Post Options
Thanks(0)
|
we'll see lol. They are in the Garage. The math I did seemed pretty good.
|
|
Hemisphere
Old Croc Joined: 21 April 2008 Status: Offline Points: 2272 |
Post Options
Thanks(0)
|
Depends what your aim is for the project, really. If you want scoops no matter what and that's your only driver option, go for it but don't expect optimal performance. It's a reflex driver not a horn driver.
|
|
tkroeker
Registered User Joined: 06 November 2015 Location: kansas Status: Offline Points: 101 |
Post Options
Thanks(0)
|
Bet I got mixed up on what driver I picked... I started with the Omega Pro and the guy thats going to be running them wanted more Xmax and in looking through options.... I was thinking these listed themselves as scoop options but ,, nope. Oh well I will drop them in some reflex and sell them to him lol.
|
|
tkroeker
Registered User Joined: 06 November 2015 Location: kansas Status: Offline Points: 101 |
Post Options
Thanks(0)
|
So what effect does having a high QES and QTS have.
These are QES - .62 QTS - .57 |
|
odc04r
Old Croc Joined: 12 July 2006 Location: Sarfampton Status: Offline Points: 5483 |
Post Options
Thanks(0)
|
Long and short of it, quite a weak motor. Small magnet, low magnetic flux in the gap, not many wire turns in the gap, small voicecoil. You get the idea.
|
|
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |