Ported Horn Kick | Q^be15 |
Post Reply | Page <123 |
Author | |
OIL
Registered User Joined: 30 October 2017 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
I meant the Black lines. It doesn't make sense to me, that they reach in to the driver bowl...
Is it intended from you? 80Hz, because it is the usual f3 for a kick bin. |
|
gen0me
Young Croc Joined: 20 February 2016 Location: UK Status: Offline Points: 999 |
Post Options
Thanks(0)
|
It was supposed to be this pic redrawned:
Oops Right than purple shouldnt go to the middle of yellow and green. More to the enclosure rear. Edited by gen0me - 11 February 2018 at 8:10pm |
|
OIL
Registered User Joined: 30 October 2017 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
ver. 0.05:
-it hits 80Hz -it has 47l chamber -the port actually works (Black always 4 cabs, Grey always 1 cab) 1Watt: 500Watts: 1cab: Anything you would change? Is there anything to reduce the displacement around 60hz? (I would suggest smaller chamber, but that would change the f3) Thanks for your time! |
|
gen0me
Young Croc Joined: 20 February 2016 Location: UK Status: Offline Points: 999 |
Post Options
Thanks(0)
|
Unmasked?
|
|
OIL
Registered User Joined: 30 October 2017 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
everything masked... Why?
|
|
gen0me
Young Croc Joined: 20 February 2016 Location: UK Status: Offline Points: 999 |
Post Options
Thanks(0)
|
Input parameters window. Tools options/settings
|
|
OIL
Registered User Joined: 30 October 2017 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
Hi genome,
ver 0.05.2 are just some more accurate values, a shorter port and a new driver: B&C 15NDL76 Do you need the other windows unmasked as well? I'm allready working on 0.6, where I'm gonna implement some throat detail similar to the La Scala design... |
|
gen0me
Young Croc Joined: 20 February 2016 Location: UK Status: Offline Points: 999 |
Post Options
Thanks(0)
|
Excursion?
Driver dont says anything if we dont know the rest of the system/music played. |
|
OIL
Registered User Joined: 30 October 2017 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
Rest of system isn't clear yet, but probably some 8"/1" Hornloaded CoAx Tops and some 18" or 21" Hybrid below... Should be able to play all types of EDM, but mostly techno, DnB and House. |
|
FrederikMA
Registered User Joined: 19 July 2017 Location: Copenhagen Status: Offline Points: 76 |
Post Options
Thanks(0)
|
I can only recommend deciding on the mid high solution before building the kicks. The lowmid region is much more subject to compromises and playfulness than the mid high region and you do not want your lowmid solution to limit your choice of mid highs.
Best regards, Fred |
|
mobiele eenheid
Old Croc Joined: 15 August 2004 Location: Netherlands Status: Offline Points: 1568 |
Post Options
Thanks(0)
|
Considering you don't know up till what frequency this kick will sound good, perhaps it's best to go for a 10" or even a 12" horn loaded mid top.
Johan |
|
Post Reply | Page <123 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |