18sound 18” Dual Subwoofer build |
Post Reply | Page <1234 5> |
Author | ||
boots-hifi
Old Croc Joined: 15 August 2011 Status: Offline Points: 2463 |
Post Options
Thanks(0)
|
|
PMd mate
|
||
bee
Old Croc Joined: 14 June 2011 Location: Middlesex Status: Offline Points: 4553 |
Post Options
Thanks(0)
|
|
Ben bin trying to get hold of you buzz me when you free....
|
||
https://www.elements-audio.com
|
||
boots-hifi
Old Croc Joined: 15 August 2011 Status: Offline Points: 2463 |
Post Options
Thanks(0)
|
|
Good stuff. Keep us posted!
|
||
wilidapili
Registered User Joined: 13 August 2018 Location: Finland Status: Offline Points: 56 |
Post Options
Thanks(0)
|
|
The box is 98% ready. Glued & painted, but still gotta attach the rubber feet and mount the drivers. We will try and do some measurements next week and I will post some photos of the finished box. We will get some Powersoft at a later stage, we don't yet know what we will use for the time being.
Much obliged
Edited by wilidapili - 25 October 2018 at 11:56am |
||
bob4
Old Croc Joined: 29 February 2004 Location: Finland/Germany Status: Offline Points: 1843 |
Post Options
Thanks(0)
|
|
Just....... Wow! Wili, with that level of precision and deep rebates I don't see any reason to be afraid of air leaks. No need for additional sealing. If your cuts are spot on, dont waste time sanding, except if you are certain that there is a problem. Also you could build without screws...... Fantastic work! |
||
Father-Francis
Old Croc Joined: 24 October 2007 Location: Kenya ,Denmark Status: Offline Points: 2760 |
Post Options
Thanks(0)
|
|
Yes boss ,
|
||
Music is the strongest form of magic.(+45 31879997)blakmanpro@gmail.com, foa@sweetboxaudio.dk
|
||
nickyburnell
Old Croc Joined: 06 February 2005 Status: Offline Points: 4410 |
Post Options
Thanks(0)
|
|
360 degree DJ worship
|
||
It's everything, not everythink!
|
||
Father-Francis
Old Croc Joined: 24 October 2007 Location: Kenya ,Denmark Status: Offline Points: 2760 |
Post Options
Thanks(0)
|
|
no updates yet the man has been in Denmark for sometime we were working on a project for next month here in denmark , some guys we knowneed to use a setup like this , will start another post about it . Edited by Father-Francis - 25 October 2018 at 7:28am |
||
Music is the strongest form of magic.(+45 31879997)blakmanpro@gmail.com, foa@sweetboxaudio.dk
|
||
boots-hifi
Old Croc Joined: 15 August 2011 Status: Offline Points: 2463 |
Post Options
Thanks(0)
|
|
Any updates on this build? Seriously considering getting 6-8 of this design built soon ready for next year. Any measurements made of the loaded box? 18sound recommends k10, what have you powered these with?
|
||
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Offline Points: 7441 |
Post Options
Thanks(0)
|
|
just get some gasket tape for around the driver and handles and stuff.
|
||
IainB
Registered User Joined: 25 November 2016 Location: Rushden Status: Offline Points: 422 |
Post Options
Thanks(0)
|
|
Awesome job would love to have a CNC milling machine, my recent attempts manually aren't as nice, filler is going to be my friend
|
||
wilidapili
Registered User Joined: 13 August 2018 Location: Finland Status: Offline Points: 56 |
Post Options
Thanks(0)
|
|
Today I made holes for the handles.
I screwed everything atleast 40mm from the corners, except 2 screws by mistake. Ofcourse both of these corners were cracked when I opened the box up, even though I pilot drilled them. I tried prying the cracks a bit open with a screw and inserted glue inside the cracks and the screw hole. I also accidentally screwed through the top at the completely wrong spot (was very tired ), so I routed out a 30mm diameter and 5mm deep spot and inserted a plug (perks of having a CNC - can whip up accurate jigs and other stuff) So no gluing the cab together as of yet. My goal is to able to test the sound on Monday!
Edited by wilidapili - 27 September 2018 at 10:18pm |
||
Post Reply | Page <1234 5> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |