Saturn 16 - 4 x 4200W - Discussion |
Post Reply | Page <1234 7> |
Author | |
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
Yep, even 2.5mm2 is better. Which is why I asked about Powercon 32A inlet on back, instead of captive lead. |
|
Global Depopulation - Alive and Killing.
|
|
JonB67
Young Croc Joined: 22 April 2016 Location: UK Status: Offline Points: 1376 |
Post Options
Thanks(0)
|
Didnt think you could put 2.5mm in a standard 13a plug so guess the cable is 1.5mm.
Seems a bit of an oversight if the amp can pull 32a if driven hard.
|
|
Robbo
Old Croc Joined: 05 December 2005 Location: Shropshire Status: Offline Points: 4226 |
Post Options
Thanks(0)
|
There are a lot of power amps fitted with captive leads that are heavier than 1.5mm
|
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
Sure Void INF8MK1 Had captive 4mm2 lead. Proline is 2.5mm2 captive. I hate putting 32A ceeforms on leads less than 4mm2, even with bootlace ferrule.
|
|
Global Depopulation - Alive and Killing.
|
|
Timebomb
Old Croc Joined: 11 October 2004 Location: Lancaster Status: Offline Points: 2716 |
Post Options
Thanks(0)
|
Cable is 2.5mm2 30A. They come with moulded on 13A plugs but i had no problem putting a replacement 13A on after it have been swapped over to a ceeform temporally, its not that hard with 2.5mm2.
|
|
James Secker facebook.com/soundgearuk
James@soundgear.co.uk www.soundgear.co.uk |
|
csg
Old Croc Joined: 17 September 2007 Location: bedford Status: Offline Points: 6086 |
Post Options
Thanks(0)
|
Yes, there are plugs that will accept 2.5mm cable, but you do fall foul of BS1363 ( which stipulates a conductor size no larger than 1.5mm) if you care about such things. I'm not sure how BS1363 effects moulded connectors however - hopefully someone else can chime in here, but certainly once cut off the amplifier can only be used with a CEEform connector under the letter of the regulations. Nothing stopping you using a 16-13A jumper however ( made with 1.5mm of course!)
2.5mm 3 core PVC flex is good for 24A ( providing it is actually copper, not copper coated aluminium)
|
|
“The fact is this is about identifying what we do best and finding more ways of doing less of it better”
|
|
bass*en*mass
Old Croc Joined: 03 September 2009 Location: "unknown" Status: Offline Points: 4009 |
Post Options
Thanks(0)
|
..Have tested that Amp on bass duty at this gig, running 8x 18nlw9601s (+12x Orbit3s, 12 Void Arc6s) - it does pretty well on Sub.. ;) 32A Plug - my bad, sorry James haha, cheers for the demo unit though! edit: 2000++ happy punters, about 20x40m floor, pretty well covered, windows at the back of the building, behind the stage, were vibrating violently (had a second gig that day at a venue across the street.. ;) ) to be honest i doubt our K20s would have done much better running those 8 Subs.. Edited by bass*en*mass - 16 January 2019 at 10:01pm |
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
Is this the internals of the Soundgear Staurn 16? Would like to know Output Device Count per channel, and make/model. |
|
Global Depopulation - Alive and Killing.
|
|
spongebob
Young Croc Joined: 20 October 2010 Status: Offline Points: 1395 |
Post Options
Thanks(0)
|
Oh dear oh dear
|
|
valve head777
Old Croc Joined: 27 July 2012 Location: East Sussex Status: Offline Points: 1781 |
Post Options
Thanks(0)
|
theres space for a nice big torroid.
|
|
Freedom of choice, choice of freedom.
|
|
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7816 |
Post Options
Thanks(0)
|
It looks like the smaller one. 4x2500 at 4 ohm.
|
|
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|
ReubGold
Registered User Joined: 09 April 2012 Location: Essex/JA Status: Offline Points: 271 |
Post Options
Thanks(0)
|
|
|
If he turns me into a zombie, first person I'm coming after is you.
|
|
Post Reply | Page <1234 7> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |