MT121 comp driver probs |
Post Reply | Page 12> |
Author | |
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
Posted: 22 May 2021 at 8:53pm |
Was ultra smooth, bullets type sizzle, without bullets !!
|
|
Global Depopulation - Alive and Killing.
|
|
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Offline Points: 7441 |
Post Options
Thanks(0)
|
Could not believe your ears cos it was good, or bad?
|
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
I don't know of many great 1.5" horns, but there are loads of good 2", so I've stuck to 2" comps.
Paudio PH4525, sounds great with many makes of 2" comp, with corrective eq for 12khz+. Sounds better than JBL 2380A that costs a fortune, and breaks so easily. As said previously, I have 12x of the EV HP940, which maybe similar to the Porn Horn 2" horn, and I've heard them do 16khz+, with JBL 2450.
Edited by levyte357- - 22 May 2021 at 9:04am |
|
Global Depopulation - Alive and Killing.
|
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
One of the Staysis tops, also uses Beyma CP755Nd 1.5".
Heard them in a Reggae Dance, could not quite believe my ears. I'm sure Void engineer was there that night, and set the Void LMS, they were using.
Edited by levyte357- - 22 May 2021 at 8:54am |
|
Global Depopulation - Alive and Killing.
|
|
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Offline Points: 7441 |
Post Options
Thanks(0)
|
think it was the porn horns used that beyma comp... not technically a void product, more like a rog / pro audio parts product.
i think that porn horn high horns are in the void stasys phil now, but i don't know what comp is on them. |
|
smitske96
Young Croc Joined: 16 February 2016 Location: The Netherlands Status: Online Points: 1085 |
Post Options
Thanks(0)
|
I would also look at the RCF ND950. 4" VC with still a good response higher up.
|
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
Can't remember exactly, I'm not a Void groupie, Staysis something.
But combinations I've used personally for years. B&C DE85 + B&C ME60 Beyma cp750ti 2" + B&C ME60 or ME75 Alu horns, Beyma cp750ti 2" and Paudio PH4525 In a nutshell, get rid of BMD750 Beyma 750ti probably best of the budget 2".
|
|
Global Depopulation - Alive and Killing.
|
|
gcaDIY
New Member Joined: 08 May 2021 Location: Madrid Status: Offline Points: 8 |
Post Options
Thanks(0)
|
totally okay with making it easy using decent comps.
What models of Void tops do you mean exactly? Which ones use that Beyma compression driver?
Thank you very much
Ant. Edited by gcaDIY - 17 May 2021 at 3:18pm |
|
biggins
New Member Joined: 13 July 2015 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Hi,
Thanks for the replies all. Lots of info to digest in the Audio Heritage thread in the thread shared by fatfreddiescat. I think that will take a few sittings to digest. MarjanM & Levyte357 - Thanks for the replies. I'll have a play about with the High Shelf EQ. MarjanM - Sorry, I'm gonna be that guy and ask The Question. Why would you not put a 1.5 comp driver on a 2" horn (using an adaptor)?
Edited by biggins - 27 April 2021 at 10:19am |
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
Make life easy, try using decent comps with fairly flat response chart upto 12khz.
Then add correcting eq as suggested by Marjan. Beyma cp755nd as used in some Void tops, are smooth, loud, go plenty above 12khz.
|
|
Global Depopulation - Alive and Killing.
|
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
Also the 2" horn is very important.
Been easily getting upto 16khz, with Beyma CP750TI, with B&C ME60 & ME75 Alum horns. But they are decent, not Cheap sh*t. I also have approx 12x EV HP940 horns, which are best I have ever heard, but will not be going anywhere.
|
|
Global Depopulation - Alive and Killing.
|
|
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7810 |
Post Options
Thanks(0)
|
First of all you can not put 1.5 inch exit driver to a 2 inch throat horn.
I mean you can, obviously, but it will have issues. Second, just add a highshelv eq above 10Khz and it will be way better. Edited by MarjanM - 26 April 2021 at 12:46pm |
|
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |