Best driver for single 15” reflex bin? |
Post Reply | Page 12> |
Author | |
ceharden
The 10,000 Points Club Joined: 05 June 2005 Location: Southampton Status: Offline Points: 11776 |
Post Options
Thanks(0)
Posted: 03 May 2021 at 8:49pm |
At a rough guess without knowing all the internals you're looking at about 100L which is a pretty sensible volume for most 15" reflex-suitable drivers so I'd stick with my previous recommendations.
You might need to re-tune but 4" ports should be easy to adjust with new bits of pipe etc.
|
|
Ajsski99
Registered User Joined: 07 October 2019 Status: Offline Points: 134 |
Post Options
Thanks(0)
|
I have managed to get the cab measurements: H: 25” or 635mm W: 18” or 457mm D: 22 1/2” or 572mm Small ports two on each are 4” or 102mm each. |
|
Earplug
Old Croc Joined: 03 January 2012 Location: Europe Status: Offline Points: 7216 |
Post Options
Thanks(0)
|
I had a couple of cabs that were similar to those ages ago. Loaded with JBL 2225's. Sounded very nice! |
|
Earplugs Are For Wimps!
|
|
Ajsski99
Registered User Joined: 07 October 2019 Status: Offline Points: 134 |
Post Options
Thanks(0)
|
Am very familiar with both of those sites, was just asking what drivers people thought would be the best suited to the cabs. Im going to try to get a friend to measure up the cabs as I’m living away from them at the moment and hopefully that info will help me make a choice on driver :)
|
|
Ajsski99
Registered User Joined: 07 October 2019 Status: Offline Points: 134 |
Post Options
Thanks(0)
|
Got an Audiohead ah2400 (t.amp 2400) I’m planning on using, tops on one channel subs on the other. I believe that’ll be around 650w @ 8ohm and 1200w @ 4ohm?
|
|
Ajsski99
Registered User Joined: 07 October 2019 Status: Offline Points: 134 |
Post Options
Thanks(0)
|
Am very familiar with both of those sites, was just asking what drivers people thought would be the best suited to the cabs. Im going to try to get a friend to measure up the cabs as I’m living away from them at the moment and hopefully that info will help me make a choice on driver :)
|
|
APC321
Young Croc Joined: 24 August 2013 Location: West Midlands Status: Offline Points: 684 |
Post Options
Thanks(0)
|
Try having a look at the Blue Aran and Thomann websites. Both are well respected suppliers with a good selection of speaker drivers, so you can get an idea of what you can buy that fits your budget.
Here are a couple of links: http://www.bluearan.co.uk/index.php?browsemode=category&category=Speaker_Components&masthead=Loudspeaker_Drivers&subheadnew=15_Inch_Drivers https://www.thomann.de/gb/loudspeaker_15_inch.html |
|
Ajsski99
Registered User Joined: 07 October 2019 Status: Offline Points: 134 |
Post Options
Thanks(0)
|
Got an Audiohead ah2400 (t.amp 2400) I’m planning on using, tops on one channel subs on the other. I believe that’ll be around 650w @ 8ohm and 1200w @ 4ohm?
|
|
citizensc
Young Croc Joined: 16 October 2015 Location: Perth,Australia Status: Offline Points: 532 |
Post Options
Thanks(0)
|
I simmed a heap of different drivers in an effort to build the best compact 15 inch reflex cab I could. The goal was to build a cab that could fit in to the back seat of a normal car.
The best driver I found was the Faital 15HP1060 (8 ohm). The cab is 100L tuned to 42hz using the impedance plot rather than matching port length to my sim. I couldn't be happier with the end result, it plays loud (for what it is), low and isn't super heavy. I plan on posting build pics, sims and real life measurements when I get some time. Hope this is of some help. Edited by citizensc - 26 April 2021 at 3:20am |
|
https://www.facebook.com/voyager.system
@voyager_soundsystem |
|
Conanski
Old Croc Joined: 26 January 2006 Location: Ottawa, Canada Status: Offline Points: 2543 |
Post Options
Thanks(0)
|
Well... the Kappa 15a is totally wrong for a "PA sub" so whatever you do don't buy any more of those.
Taking a WAG at the pictures I'd guess those are 4-5cu ft tuned to 45hz maybe, If so there are all kinds of decent drivers at a range of price levels that would work, how much power do you have to put behind them?
|
|
ceharden
The 10,000 Points Club Joined: 05 June 2005 Location: Southampton Status: Offline Points: 11776 |
Post Options
Thanks(0)
|
Based purely on what I've used myself in similar boxes, you're probably looking at something like:
B&C 15PS100 Beyma 15G40 - use these currently Lots of other options well within your price range but without more info on the cabs, it's hard to say for certain exactly which driver will work the best in them. The above options should work in a reasonable range of cabinet volumes.
|
|
Ajsski99
Registered User Joined: 07 October 2019 Status: Offline Points: 134 |
Post Options
Thanks(0)
|
Unfortunately I have no idea what the volume or dimensions are of these cabs and I won’t be able to find out for a few months.
I’m based in the UK so can source pretty much any driver. (don’t really want to spend anymore than £200 per driver… more than happy to go secondhand) And the tops I’ll be using are ohm rw3’s
|
|
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |