Looking for a rack mount PDU, any help? |
Post Reply | Page 12> |
Author | |
BigSoundNorthWest
Registered User Joined: 29 November 2014 Location: Manchester Status: Offline Points: 290 |
Post Options
Thanks(0)
Posted: 17 March 2024 at 8:23am |
Buy a good long 32a cable, as most venues will have a spare 32a in the back of the bar, or for a kitchen setup. Always worth an ask.
|
|
Lucasdude
Young Croc Joined: 16 March 2013 Location: London Status: Offline Points: 823 |
Post Options
Thanks(0)
|
BREAKING NEWS:- Guy who joins forum to plug his own products really likes his own products.
|
|
Benjaminmark
New Member Joined: 12 March 2024 Location: Sydney Status: Offline Points: 2 |
Post Options
Thanks(0)
|
You can try this.
https://www.mssdatasolutions.com.au/p/racks-and-cabinets/accessories/power-distribution i have tried this better for me.
|
|
knet94
Old Croc Joined: 31 March 2008 Location: NW London Status: Offline Points: 1510 |
Post Options
Thanks(0)
|
Some Kelseys on Facebook.
Also I will have some coming up after the middle of May.
|
|
Lucasdude
Young Croc Joined: 16 March 2013 Location: London Status: Offline Points: 823 |
Post Options
Thanks(0)
|
Shameless plugging....
|
|
Benjaminmark
New Member Joined: 12 March 2024 Location: Sydney Status: Offline Points: 2 |
Post Options
Thanks(0)
|
In choosing a PDU for a sound system, it's important to consider the type of power available at the venue and the power requirements of your equipment. In most cases, a flexible system with multiple outlets is the way to go. But, if 32A three phase power is frequently available, then a separate 32A three phase distro might be a better option.
i bought from here
|
|
DJ-Dulux
Registered User Joined: 24 August 2009 Location: Kenilworth, UK Status: Offline Points: 378 |
Post Options
Thanks(0)
|
Here is what I have... Obviously many variations of this....
Dupe...
|
|
Dupe...
|
|
snowflake
Old Croc Joined: 29 December 2004 Location: Bristol Status: Offline Points: 3122 |
Post Options
Thanks(0)
|
surely get a 32A single phase distro for normal use. then when three phase power is available use a sperate 3-phase distro to split to 3*32A single phase - plug your distro into one phase and run the big amp off its own phase.
Put a 32A ceeform on the big amp and then use adpater cables to connect it to 32A distro (20A powercon) or to 13A mains if that is all that is available so you can run the big amp of it's own 13A and everything else through the distro on another 13A. Edited by snowflake - 04 May 2021 at 1:33pm |
|
kevinmcdonough
Old Croc Joined: 27 June 2005 Location: Glasgow Status: Offline Points: 3751 |
Post Options
Thanks(0)
|
You're probably better sticking with individual sockets then, if that's what you'll use most of the time.
To keep things neat, I'd put a panel on the back with some powercon sockets, one linked to each amp, or even just two really, one for the sub amp and one joined to the kicks and tops amp. That way you can carry some cables with you to plug things in. Most of the time that would be short 13a to powercon cables, but you could also have different combinations for other things. Then a stand alone distro like this.... or even just a small one like this...... would probably be the best bet for you for the odd times that you are given a more powerful feed from a genny. You can then use the appropriate cables from your distro into the powercons in your amp rack.
Edited by kevinmcdonough - 04 May 2021 at 11:49am |
|
Ajsski99
Registered User Joined: 07 October 2019 Status: Offline Points: 134 |
Post Options
Thanks(0)
|
This setup sounds exactly what I’m after as I can see us using a range of different venues.
|
|
Ajsski99
Registered User Joined: 07 October 2019 Status: Offline Points: 134 |
Post Options
Thanks(0)
|
9 times out of 10 I imagine I’ll be in a venue that only
Has standard wall sockets, which is a bummer as I won’t be able to run anything at full potential. Occasionally though we may get hired out (I hope!) for private events outdoors so will be running off of generator power which will either be 32a single phase 230v or 32a 3 phase 415v
|
|
kevinmcdonough
Old Croc Joined: 27 June 2005 Location: Glasgow Status: Offline Points: 3751 |
Post Options
Thanks(0)
|
It depends what you mean by PDU.
There are some PDU units that are designed to run racks of effects and outboard gear etc, but obviously they don't handle anywhere near enough current for a full rack of amps. The kind of thing you're looking for would be more like this: That one is from SSE, the sound company, and has a 32amp in, and will have connectors on the back to then power each individual amp. there are plenty of others from other companies, VDC do some decent ones, ProLightConcepts. I can help you out if needed. but the problem is it really depends on what power you have in the venues you work. If you're working in places that are well kitted out, you may have reliable 3 phase power, and so you may want to pick one that has 3 phase in: If you work in a lot of venues that only have 13a sockets, then you might be better to keep everything separate so you can spread the load over a few plug sockets.
|
|
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |