Bass Amp survery - Scoop System Owners |
Post Reply | Page <123> |
Author | |||
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
||
Have you tried 1x yet? I have 4 ohm drivers, and was intending to use lower rated, 1u k20 lookalike model, for 1x per channel, but economics is just not making sense. Edited by levyte357- - 08 November 2022 at 10:26am |
|||
Global Depopulation - Alive and Killing.
|
|||
snowflake
Old Croc Joined: 29 December 2004 Location: Bristol Status: Offline Points: 3121 |
Post Options
Thanks(0)
|
||
I've got CVR 2004 and 1004 and Morin K420. Haven't had a chance to push them to limit on bass drivers yet. 1004 amps are on an install and not breaking a sweat. DSP interface is nice.
|
|||
fat_brstd
Old Croc Joined: 23 August 2008 Location: Melbourne, OZ Status: Offline Points: 2126 |
Post Options
Thanks(0)
|
||
The FFA10K is a bit of a weird one as it has 2 power supplies that each take a 16A powercon input. The guy I know who has one runs it off a distro with 20A breakers and he has never tripped one from over current but he is only running half of the amp on any one leg of a 3 phase. I dont think they took current draw measurements when they did the big shootout at abletronics back in the day but it scored exactly the same as the PL380 at 40hz (2916w into 4ohms) |
|||
Melbournes Rootical Warrior Roots - Dub - Steppers facebook page |
|||
king david
Young Croc Joined: 17 January 2007 Location: italy Status: Offline Points: 1324 |
Post Options
Thanks(0)
|
||
The FFA can do 3 or 4 drivers a side much better than the pl380, they are closer at 4ohms
Edited by king david - 08 November 2022 at 10:48pm |
|||
http://www.warriorcharge.noblogs.org
|
|||
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7816 |
Post Options
Thanks(0)
|
||
These :)
|
|||
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|||
paulus
Old Croc Joined: 14 December 2005 Location: SOUTH BIRMINGHA Status: Offline Points: 3181 |
Post Options
Thanks(0)
|
||
https://www.sinbosenaudio.com/sinbosen-fp22000q-p00095p1.html
i have heard this amp running turbomax scoops and the bass was very good indeed with head room |
|||
TRENDSETTER SOUND SYSTEM
|
|||
paulus
Old Croc Joined: 14 December 2005 Location: SOUTH BIRMINGHA Status: Offline Points: 3181 |
Post Options
Thanks(0)
|
||
@MarjanM are they the same as the elements amplifiers???
|
|||
TRENDSETTER SOUND SYSTEM
|
|||
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
||
Hi mate, was it 2x channels running 4x drivers, other 2x channels running kick bass?
|
|||
Global Depopulation - Alive and Killing.
|
|||
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7816 |
Post Options
Thanks(0)
|
||
Yes, Ben and I worked hard with the supplier to make those as reliable as possible! |
|||
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|||
paulus
Old Croc Joined: 14 December 2005 Location: SOUTH BIRMINGHA Status: Offline Points: 3181 |
Post Options
Thanks(0)
|
||
https://www.elements-audio.com/shop/amplification/ck26-detail
i was really interested in this one ( to replace my pxm 1450 )but it seems there are none about
|
|||
TRENDSETTER SOUND SYSTEM
|
|||
vertx
Young Croc Joined: 14 March 2012 Location: Sydney Status: Offline Points: 578 |
Post Options
Thanks(0)
|
||
I've currently been trialing these and was considering providing them for people down here. Unfortunately 1 of 5 I've received has had an issue. On arrival, the amp that arrived with a fault was producing electronic noise from one of the channels when connected to a driver, and the amp smelt like burning when powered on. Many weeks of back and forth, taking voltage, ohm, and other measurements for them, they sent me out a new input module, which I replaced, and it seemed to mostly fix the issue, although I'm not too happy with the QC and overall experience, I hope you've had a better run.
|
|||
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7816 |
Post Options
Thanks(0)
|
||
We have sold over 500 units all over the world and the failure rate is extremely low and we had none of them fail because of factory defects but operator fault. Our SP2.26 are driving 3 18NLW9601 per channel effortlessly. Some number of our amps are coming to AU trough our AU distributor Buzz Hire. Container should ship next week.
Edited by MarjanM - 12 November 2022 at 3:13pm |
|||
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|||
Post Reply | Page <123> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |