ES18-BPH Build Pics |
Post Reply | Page <1 4567> |
Author | |
Static Age
Old Croc Joined: 14 November 2005 Location: Oxfordshire Status: Offline Points: 1652 |
Post Options
Thanks(0)
|
about three & a half sheets will make 4 cabs, if you plan your cuts carefully.
if there is one kind of music these do well its psytrance, it sounds great through them!
TMS4 are good cabs but using them with ES18 will have you wondering what to do with the 18" section of the TMS4.
Do you cross over from the ES18 to the 18" turbo, this leaves the 18" turbo only playing a very small frequency band say 190-250hz.
Or do you used the 18" section of the TMS4 to cover the same frequency as the ES18?
personally i would use a different kind of cab for mid/high above the ES18, something without its own bass section.
|
|
|
|
Hugo Biermann
Young Croc Joined: 05 February 2005 Location: South Africa Status: Offline Points: 809 |
Post Options
Thanks(0)
|
I would think that a good system for dance would be:
6x ES18-BPH a side with 2x MT-121 [or better Porn MK2] a side. |
|
www.aggressiveaudio.co.za
|
|
hektik
Registered User Joined: 12 October 2006 Location: NORFOLK Status: Offline Points: 217 |
Post Options
Thanks(0)
|
good point on the ...wot t do wiv the 18's in the tms4 ..how about 2 hd's for mid and 2 tse 111......or even mackia active 1530... the whole system needs t b small ,powerfull an transportable cant b arsed wiv having to use a luton evrytime i move it . |
|
Mark James
Old Croc Joined: 15 January 2006 Location: rig side Status: Offline Points: 5309 |
Post Options
Thanks(0)
|
in that case you might want four hds and a couple of x1 or even reflex subs, just a pair of halfe x10 on top and your away..... I will report back on the sn15b in the hd experience as soon as I have a shance to realy test them lol, they are uber leight, 1 man lift eaasily!
|
|
me so horny me love you long throw
horn loaded for her pleasure |
|
Static Age
Old Croc Joined: 14 November 2005 Location: Oxfordshire Status: Offline Points: 1652 |
Post Options
Thanks(0)
|
HD15's for mid above ES18-BPH, err no. some kind of 12" straight horn between the ES18 & TSE111 would be good.
like Mark says i would go for a mid/ high cab that can play low enough to meet the ES18-BPH. reflex 10" or 12" would do it, half X10 or half X12.
have you seen my MT101 (single version of MT102) horns? i have modified the plan so they are the same width as the ES18. very compact & loud.
Edited by Static Age - 27 June 2008 at 12:38pm |
|
|
|
mashgwan
Young Croc Joined: 20 May 2004 Status: Offline Points: 613 |
Post Options
Thanks(0)
|
heres our 2 being tested, hopefully there should be another 6 on the way
Edited by mashgwan - 27 June 2008 at 12:52pm |
|
Static Age
Old Croc Joined: 14 November 2005 Location: Oxfordshire Status: Offline Points: 1652 |
Post Options
Thanks(0)
|
what are they loaded with & do you like the sound?
|
|
|
|
hektik
Registered User Joined: 12 October 2006 Location: NORFOLK Status: Offline Points: 217 |
Post Options
Thanks(0)
|
think im gunna go wiv 4 es18bph and 2 mackie active 1530's.....its all for psytrance and nothing else so i think the mackies should cope with the mid top quite well |
|
mashgwan
Young Croc Joined: 20 May 2004 Status: Offline Points: 613 |
Post Options
Thanks(0)
|
ours are loaded with c650's and i think they sound really good
|
|
Static Age
Old Croc Joined: 14 November 2005 Location: Oxfordshire Status: Offline Points: 1652 |
Post Options
Thanks(0)
|
good stuff. it seems that there is quite a wide choice of drivers that work well in these cabs.
i have tried both RCF & Eminence, both sound great.
|
|
|
|
Dj Maca Roots
Registered User Joined: 13 September 2007 Location: United States Status: Offline Points: 109 |
Post Options
Thanks(0)
|
I'm going to try my set of Omega Pro 18, is that what you used?
|
|
Can't Stop Jah Music
|
|
Sequence Empire:::..
Registered User Joined: 13 January 2009 Location: New Zealand Status: Offline Points: 84 |
Post Options
Thanks(0)
|
I've AutCAD'd the drawings for an ES218-BPH, I plan on 3 ES218's per side with 2 x MT121's, Drum & Bass/Dubstep Is it worth going for the SD-18's to get the lower extension? or do I need some dedicated subs goin on the bottom? USB2's for one cab solution??? |
|
Post Reply | Page <1 4567> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |