USB2 |
Post Reply | Page <1 26272829> |
Author | |||
Timebomb
Old Croc Joined: 11 October 2004 Location: Lancaster Status: Offline Points: 2716 |
Post Options
Thanks(0)
|
||
Ive not simulated or tested or even heard the USB2 no, but I have simulated and listened to similar horns with similar drivers and these type of horns always sim with high excursion down low, i cant say ive driven any that hard other than HD15s but they are defiantly limited by excursion, i would expect larger/lower vertions to be the same. That RCF does have a deep top plate so can be driven past the overhang without as much loss of BL as with driver with a shallow top plate, but 5mm overhang is not much for a driver of that thermall rating so i expect it will inevitably suffer from loss of BL and mechanical compression if you drive it hard which the punisher does not, it is more limited thermally. They are quite different designs really though, the punisher is more suited to larger stacks with a seperate mid bass cab, BP horns like the USB2 F118 etc are more for smaller stacks where a full range bass cab is more sensible imo. |
|||
James Secker facebook.com/soundgearuk
James@soundgear.co.uk www.soundgear.co.uk |
|||
wtk
Registered User Joined: 09 March 2012 Location: CZ Status: Offline Points: 10 |
Post Options
Thanks(0)
|
||
hi, is usb2 still reverse loaded as usb for better cooling?
|
|||
tomschute
Old Croc Joined: 15 May 2006 Location: Mid Wales Status: Offline Points: 1817 |
Post Options
Thanks(0)
|
||
There are no over heating problems. It's a good design.
Tom |
|||
Out to lunch... stableaudio@hotmail.co.uk
www.stableaudio.co.uk Speaker Building Services |
|||
wtk
Registered User Joined: 09 March 2012 Location: CZ Status: Offline Points: 10 |
Post Options
Thanks(0)
|
||
hi davey, would you send me that nda you mentioned? it is not possible for me to buy finished ones as i am not from UK.
please mail me to adress from my profile.
Edited by wtk - 03 April 2012 at 1:27pm |
|||
superspunk
Registered User Joined: 16 November 2012 Location: Spain Status: Offline Points: 60 |
Post Options
Thanks(0)
|
||
So...finally, how can I get the plans. Davey....how is it possible..? I don't know how to contact with you
|
|||
superspunk
Registered User Joined: 16 November 2012 Location: Spain Status: Offline Points: 60 |
Post Options
Thanks(0)
|
||
So...finally, how can I get the plans. Davey....how is it possible..? I don't know how to contact with you
|
|||
Tom Tapey
Registered User Joined: 27 May 2005 Location: United Kingdom Status: Offline Points: 293 |
Post Options
Thanks(0)
|
||
I think Tomschute has the rights on them at the moment best speak to him.
|
|||
superspunk
Registered User Joined: 16 November 2012 Location: Spain Status: Offline Points: 60 |
Post Options
Thanks(0)
|
||
Thanks!
|
|||
tomschute
Old Croc Joined: 15 May 2006 Location: Mid Wales Status: Offline Points: 1817 |
Post Options
Thanks(0)
|
||
PM'd
|
|||
Out to lunch... stableaudio@hotmail.co.uk
www.stableaudio.co.uk Speaker Building Services |
|||
superspunk
Registered User Joined: 16 November 2012 Location: Spain Status: Offline Points: 60 |
Post Options
Thanks(0)
|
||
PM sent
|
|||
superspunk
Registered User Joined: 16 November 2012 Location: Spain Status: Offline Points: 60 |
Post Options
Thanks(0)
|
||
Tomschute, I, ve sent you an email...
|
|||
superspunk
Registered User Joined: 16 November 2012 Location: Spain Status: Offline Points: 60 |
Post Options
Thanks(0)
|
||
still I can not send PM's
|
|||
Post Reply | Page <1 26272829> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |