Database simulation |
Post Reply | Page <12345 23> |
Author | |
bitzo
Registered User Joined: 20 November 2007 Location: Italy Status: Offline Points: 977 |
Post Options
Thanks(0)
|
Fane scoop 15"
s1=428.5 s2=663.5 exp=7.5 s3=857 exp=47 s4=1678 exp=67.5 s5=3400 exp=26 vrc=0 lrc=0 ap=0 lpt=0 vtc=37865 atc=2286,5 Measure taken from http://www.speakerstore.nl/index.php?pg=11&c=9 Edited by bitzo - 28 May 2008 at 8:39pm |
|
bitzo
Registered User Joined: 20 November 2007 Location: Italy Status: Offline Points: 977 |
Post Options
Thanks(0)
|
JBL scoop 15"
s1=473,5 s2=775 exp=29 s3=1688,5 exp=66 s4=2341 exp=25,5 s5=3228 exp=24,5 vrc=0 lrc=0 ap=0 lpt=0 vtc=46931 atc=2226 Measure taken from http://members.aol.com/xxbase80a/rutsche.1.15/box.html edit: sorry s2 is 775 not 77,5 ;P Edited by bitzo - 18 August 2009 at 10:47am |
|
bitzo
Registered User Joined: 20 November 2007 Location: Italy Status: Offline Points: 977 |
Post Options
Thanks(0)
|
Single usb
s1= 825.60 s2=877,2 con=13 s3=1210 con=20.5 s4=2770 con=33.5 vrc=46.5 lrc=22.7 fr=0 tal=0 vtc=31205 atc=2100 measure taken from http://www.speakerplans.com/forum/forum_posts.asp?TID=5371&KW=usbplan&PID=163484#163484 Edited by bitzo - 18 August 2009 at 10:48am |
|
Deadbeat
Old Croc Joined: 12 March 2008 Location: Singularity Status: Offline Points: 3167 |
Post Options
Thanks(0)
|
Bitzo, sorry about this one, but I've started modelling BP alignments on hornresp (in short - it works). Do you mind me putting on some non-horns once in a while?
|
|
Away on extended leave.
|
|
bitzo
Registered User Joined: 20 November 2007 Location: Italy Status: Offline Points: 977 |
Post Options
Thanks(0)
|
Esbph 18 by Stipe
s1= 801 s2=987 con=12 s3=1400 con=28 s4=3676 con=37 vrc=79.6 lrc=54.5 fr=0 tal=0 vtc=51330 atc=2915 measure taken from http://groups.msn.com/SpeakerBuildingpics/shoebox.msnw?action=ShowPhoto&PhotoID=19 Edited by bitzo - 18 August 2009 at 10:47am |
|
LoW_cY
Registered User Joined: 18 June 2008 Location: Italia Status: Offline Points: 43 |
Post Options
Thanks(0)
|
Puoi postare anche i dati per il cerwin vega ab-36?
Ciao |
|
I need BASS!!!!
|
|
bitzo
Registered User Joined: 20 November 2007 Location: Italy Status: Offline Points: 977 |
Post Options
Thanks(0)
|
Probably I can't...Because cerwin vega cabs are copyrighted, However I did'nt ask before to the site admin....
|
|
LoW_cY
Registered User Joined: 18 June 2008 Location: Italia Status: Offline Points: 43 |
Post Options
Thanks(0)
|
Can you simulate for me the V-18 1000 response in the cerwin vega?
|
|
I need BASS!!!!
|
|
bitzo
Registered User Joined: 20 November 2007 Location: Italy Status: Offline Points: 977 |
Post Options
Thanks(0)
|
yup, I can but.... It's interesting to learn how to use hornresp, I learnt reading the help section of this software and trying.
Edited by bitzo - 08 September 2008 at 11:44am |
|
LoW_cY
Registered User Joined: 18 June 2008 Location: Italia Status: Offline Points: 43 |
Post Options
Thanks(0)
|
I know would be better if i can tried by myself, but for this time could you simulate it?
Mario |
|
I need BASS!!!!
|
|
bitzo
Registered User Joined: 20 November 2007 Location: Italy Status: Offline Points: 977 |
Post Options
Thanks(0)
|
send me by pm the t/s of the void, next time $ ;P
|
|
Deadbeat
Old Croc Joined: 12 March 2008 Location: Singularity Status: Offline Points: 3167 |
Post Options
Thanks(0)
|
Thought these should be in here:
X1 bandpass cabinet measurements taken from the plans on the main site. Front chamber tuned lower:
S1=684
S2=684
con=43.50
vrc=62
lrc=50.40
ap=684
lpt=26
vtc=189000
atc=2520
Front chamber higher tuned:
S1=684
S2=684
con=26
vrc=189 lrc=50.40
ap=684
lpt=43.50
vtc=62000
atc=2520 IMPORTANT: As with all ported things, when you simulate this, at the SPL response page, you have to select combined response from the drop down menu (Tools) and set it to zero. Also, port lengths are physical, in reality due to the X1 being on the floor and end correction, the X1 will go a bit lower than it seems. Check with Rog's graphs on the plans and when the ports are the right length, they should look about the same (model and graph). |
|
Away on extended leave.
|
|
Post Reply | Page <12345 23> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |