Dual 12" w-bin |
Post Reply | Page 123> |
Author | |
Dub Specialist
Old Croc Joined: 30 December 2011 Location: Smethwick Status: Offline Points: 3230 |
Post Options
Thanks(0)
Posted: 23 May 2012 at 1:41pm |
|
|
Dub Specialist
Old Croc Joined: 30 December 2011 Location: Smethwick Status: Offline Points: 3230 |
Post Options
Thanks(0)
|
djk...do you know what driver is the nearest the the original Ev driver then??? by anychance.. thanks Fs=45hz Qms=9.5 Qes=0.215 Qts=0.210 Vas=5.06 cu. ft. |
|
Dub Specialist
Old Croc Joined: 30 December 2011 Location: Smethwick Status: Offline Points: 3230 |
Post Options
Thanks(0)
|
so are the ev tl5050's the same as ev Sentry iv ??
Edited by Dub Specialist - 22 May 2012 at 12:40am |
|
Laurin
Registered User Joined: 10 July 2006 Location: Germany Status: Offline Points: 182 |
Post Options
Thanks(0)
|
No this is a rendering from a EAW BH-882 "Bertha". The user "Retrophonic" from the waveboard techtalk posted it a while ago in a thread:
|
|
teeboy
Registered User Joined: 10 November 2009 Status: Offline Points: 51 |
Post Options
Thanks(0)
|
delta 12 lf 4ohm version really good if you like punchy bass got them in my tl5050's and they sound good x-over at between about 51-55 hz - 250 hz did have them at 410 hz to give a bit more mid, but only when i was running 18xb's under them, hope this could be of help.
|
|
_djk_
Old Croc Joined: 23 November 2004 Location: United States Status: Offline Points: 6002 |
Post Options
Thanks(0)
|
At 50hz a direct radiator box of the same net size will have 10dB more output.
The horn will have more output in the 300hz~400hz region. If you want to try different drivers in Hornresp Cut-Off Frequency=50hz (hyperbolic-exponential T=0.6) Throat Area=81 sq. in. Length=53 in Mouth Area=769 sq. in. Front Cavity=130 cu. in. Rear volume=1.7 cu.ft. Original EV driver (two 12s) Fs=45hz Qms=9.5 Qes=0.215 Qts=0.210 Vas=5.06 cu. ft. |
|
djk
|
|
Dub Specialist
Old Croc Joined: 30 December 2011 Location: Smethwick Status: Offline Points: 3230 |
Post Options
Thanks(0)
|
|
|
_djk_
Old Croc Joined: 23 November 2004 Location: United States Status: Offline Points: 6002 |
Post Options
Thanks(0)
|
"Hm, LAB12's looks nice, but, they have very low sensitivity :/ "
Not in a horn, they don't.
"Any sugestions about another 12" sub bass drivers?" The mouth of a TL5050 is tiny, don't expect sub bass out of it no matter what driver you put in it.
|
|
djk
|
|
teeboy
Registered User Joined: 10 November 2009 Status: Offline Points: 51 |
Post Options
Thanks(0)
|
i have two of the tl5050's running eminence delta 12lf's 500w 4ohm version and they seem to work very well in this cabinet.
|
|
Deadbeat
Old Croc Joined: 12 March 2008 Location: Singularity Status: Offline Points: 3167 |
Post Options
Thanks(0)
|
That's suspect as well- the Sp12C was a fullrange driver was it not? I think something like one of the DLs would be better.
|
|
Away on extended leave.
|
|
nineleaves
Young Croc Joined: 31 August 2007 Status: Offline Points: 1327 |
Post Options
Thanks(0)
|
3.3mm xmax for the EV sp12c ..suuure thats the driver for the cab ? that seems a 'little' bit lean for a bass bin ;)
|
|
djstefanos
Old Croc Joined: 18 November 2005 Status: Offline Points: 2355 |
Post Options
Thanks(0)
|
The 3D rendering is an EAW "Bertha". A dual 18
Edited by djstefanos - 13 October 2008 at 7:35pm |
|
Post Reply | Page 123> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |