H/R118 by Startec |
Post Reply | Page <1234 12> |
Author | ||
wafflesomd
Young Croc Joined: 21 September 2007 Status: Offline Points: 811 |
Post Options
Thanks(0)
|
|
I was hoping these would be a nice cabinet to use over the 186, but not for me.
186 doesn't go as low, but there's no way I could move four of those ported horns by myself every gig. |
||
Sibulus
Registered User Joined: 11 October 2006 Status: Offline Points: 901 |
Post Options
Thanks(0)
|
|
Language barrier I think mate. |
||
dj-panoramix
Registered User Joined: 28 September 2005 Location: France Status: Offline Points: 462 |
Post Options
Thanks(0)
|
|
exactly , i just try to answer with my bad english sorry !!
|
||
Deadbeat
Old Croc Joined: 12 March 2008 Location: Singularity Status: Offline Points: 3167 |
Post Options
Thanks(0)
|
|
Nah it's fine - tell this mister Startec to keep up the good work.
|
||
Away on extended leave.
|
||
heinrich
Registered User Joined: 21 February 2007 Location: Calindagan Status: Offline Points: 280 |
Post Options
Thanks(0)
|
|
actually this is a very close contender to martin's WLX as far as this thread is concerned:
http://www.speakerplans.com/forum/forum_posts.asp?TID=18252 and it's size is 90% - 95% near to this: http://www.martin-audio.com/tourandprof/wlx.html Edited by heinrich - 23 October 2008 at 2:40am |
||
.....power is nothing without control....
|
||
mykey
Old Croc Joined: 18 August 2005 Location: UK/Indonesia Status: Offline Points: 9680 |
Post Options
Thanks(0)
|
|
looks great!
My only query is, the rear of the driver is facing straight towards the port exit
didn't read through it all, but has anyone bulit this?
if you're going to build this, I would suggest maybe putting a piece of wood in marked red?
Edited by mykey - 24 October 2008 at 12:20pm |
||
Xmax extreme
Registered User Joined: 23 May 2006 Location: Pilipinas Status: Offline Points: 308 |
Post Options
Thanks(0)
|
|
|
||
Maximum Excursion
Don't criticize your own competition, it looks like a publicity of your own commercial products. |
||
mykey
Old Croc Joined: 18 August 2005 Location: UK/Indonesia Status: Offline Points: 9680 |
Post Options
Thanks(0)
|
|
Yes, it would be nice if the air saw the rest of the chamber before it left, I've always used the idea that if the cone can't directly see the exit of the port in a design like this, the better it is
not to bad if its port tubes, say directly behind a driver, but not a labrynth port like this
I put a reflective panel in the XXL around the port area for this reason Edited by mykey - 25 October 2008 at 4:02pm |
||
mykey
Old Croc Joined: 18 August 2005 Location: UK/Indonesia Status: Offline Points: 9680 |
Post Options
Thanks(0)
|
|
|
||
Xmax extreme
Registered User Joined: 23 May 2006 Location: Pilipinas Status: Offline Points: 308 |
Post Options
Thanks(0)
|
|
Got the point.... a reason why Martin WLX uses two rounded ports...
|
||
Maximum Excursion
Don't criticize your own competition, it looks like a publicity of your own commercial products. |
||
Mark James
Old Croc Joined: 15 January 2006 Location: rig side Status: Offline Points: 5309 |
Post Options
Thanks(0)
|
|
so then, how low would say four of these get? it looks realy similar to the design amano posted recently too, Im interested as these seem to be a possible candidate for a relatively cheap sub to go under some slightly unusual hd15's [ie 300w neo drivers, slightly less overall output, a fair bit lighter cheaper and more efficient] could a design like this do say 30<70hz at moderate power levels? |
||
me so horny me love you long throw
horn loaded for her pleasure |
||
Xmax extreme
Registered User Joined: 23 May 2006 Location: Pilipinas Status: Offline Points: 308 |
Post Options
Thanks(0)
|
|
surely this will play lower in a group of 4 per side... so excited to build the first two pair the following week...
|
||
Maximum Excursion
Don't criticize your own competition, it looks like a publicity of your own commercial products. |
||
Post Reply | Page <1234 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |