HD15 Driver Sims |
Post Reply | Page <1 45678 9> |
Author | ||
simo69
Old Croc Joined: 29 September 2005 Location: United Kingdom Status: Offline Points: 1890 |
Post Options
Thanks(0)
|
|
I have heard that they will work well in the hornloaded cabinets ... I have purchased one to try also.
Edited by simo69 - 08 July 2009 at 10:04pm |
||
jORDy
New Member Joined: 28 July 2009 Location: Romania Status: Offline Points: 9 |
Post Options
Thanks(0)
|
|
Can you please simulate this driver when you have some free time? These are his parameters:
FS - 40 hz
Re - 5.5 ohm Qes - 0.35 Qms - 2.63 Qts - 0.31 Vas - 190 L Sd - 839 cm2 Xmax - 3 mm Mms - 80 gr Bl - 19.2 Le - 1.76 Cms - 0.19 (mm/N) Rms - 7.96 (kg/s) Cheers.
|
||
jonny4288
Registered User Joined: 06 August 2008 Location: N.Wales (WXM) Status: Offline Points: 586 |
Post Options
Thanks(0)
|
|
hi jordy,
i would recommend a driver with an xmax higher than that, 5mm and above will work well
|
||
jORDy
New Member Joined: 28 July 2009 Location: Romania Status: Offline Points: 9 |
Post Options
Thanks(0)
|
|
Heh, it's a bit hard to find a driver with a bit higher x-max and don't jump over my budget... :(
|
||
tweeter box
Old Croc Joined: 21 October 2007 Location: United Kingdom Status: Offline Points: 6784 |
Post Options
Thanks(0)
|
|
Zollax
Registered User Joined: 11 June 2008 Location: Sweden Status: Offline Points: 48 |
Post Options
Thanks(0)
|
|
Hi :) I was wondering if someone could simulate the Fane Soveregin 15-600 LF
http://www.fane-acoustics.com/prod_details.aspx?pid=197 Would be very helpful :D //Zollax |
||
Carlos Alexis
New Member Joined: 27 April 2010 Location: USA Status: Offline Points: 7 |
Post Options
Thanks(0)
|
|
any idea of how eminence kilomax will do in this box? how many watts?
|
||
t.geessounds
Young Croc Joined: 10 May 2010 Location: US... New york Status: Offline Points: 908 |
Post Options
Thanks(0)
|
|
how about the kappa pro 15LF-2 is this a good choice for the hd??
|
||
levyte357
The 10,000 Points Club Joined: 10 May 2004 Location: UK, London Status: Offline Points: 11743 |
Post Options
Thanks(0)
|
|
Fane Sov Pro 15-500
Comments ASAP please |
||
"Who am I? I'm the guy who does his job.. You must be the other guy".
|
||
sKs01
Old Croc Joined: 11 April 2008 Location: sheffield Status: Offline Points: 1744 |
Post Options
Thanks(0)
|
|
4.0 Pi for kick cabs lev, also I'm not sure if the simulation for the 154 is correct it should look like the one on the plans page of the main site, rog put up the correct input perimeters though i can remember where...
Edited by sKs01 - 12 May 2010 at 12:26am |
||
You're a big man, but you're in bad shape. With me it's a full time job. Now behave yourself.
|
||
levyte357
The 10,000 Points Club Joined: 10 May 2004 Location: UK, London Status: Offline Points: 11743 |
Post Options
Thanks(0)
|
|
OK. Im assuming all the previous sims were based on 2x cabs on the floor hence 1PI, but raised above subs its 4PI? |
||
"Who am I? I'm the guy who does his job.. You must be the other guy".
|
||
sKs01
Old Croc Joined: 11 April 2008 Location: sheffield Status: Offline Points: 1744 |
Post Options
Thanks(0)
|
|
spot on, btw read the edited version of my post, i'm a bit knackered and on my way to bed. |
||
You're a big man, but you're in bad shape. With me it's a full time job. Now behave yourself.
|
||
Post Reply | Page <1 45678 9> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |