Do you know this Project from Beyma ? |
Post Reply | Page <1 23456 7> |
Author | |
KenTech
Registered User Joined: 05 December 2006 Status: Offline Points: 133 |
Post Options
Thanks(0)
|
Ibex, thanx a lot !! until i sell my BPH Loaded with C18, i will make a SB18 Cab, as soon as posibile. It's smaller, more compact and i'm curious too of the comparason result.
Can u post as well the Plot for DIAPHRAGM DISPLACEMENT, at 600W/piece or 1200W/2 bins, for SN15LF. 10q, again ! Edited by KenTech - 05 July 2009 at 4:59am |
|
Ibex
Young Croc Joined: 27 May 2009 Status: Offline Points: 1013 |
Post Options
Thanks(0)
|
Beyma SB15 - PAudio SN-15LF - Excursion 69,28V KenTech, I'm sorry, I made a little mistake with the simulation between 2xSB15 vs. ES-18BPH, now the plot above should be correct! Yesterday I hab the chance to get an auditory impression of an stack of 4 ES-18BPH loaded with Eminence Omega Pro-18A. They played not too deep, but a clear punchy sound with the right kick. The 4 cabs were driven by 2 bridged QSC 2450, so more than enough power. Their unprocessed response was very flat and they did easily 145dB! They did a better job than a stack of 4 HK RL118! ES-18BPH x4 - Eminence Omega Pro-18A - SPL 113,13V greez |
|
KenTech
Registered User Joined: 05 December 2006 Status: Offline Points: 133 |
Post Options
Thanks(0)
|
thanx again Ibex.
Maybe i'm asking too much.. but can u post the plot of comparison between 2 x SB15-1 Loaded with Beyma SM115K and ES18BPH loaded with C18ELF, a plot of comparison between 2 x SB15-1 loaded with SD15 ( Paudio ) (http://www.p-audio.co.uk/products/db_product_1_13_sd-15.htm ) and Es18BPH loaded with C18ELF.... i'm trying to make a point of view... does it worth to change the ES18BPH with 2 x SB15-1 ? if yes, wich one driver mentionated by me ( SN15LF, SD15, SM115K ). have a great day. |
|
Ibex
Young Croc Joined: 27 May 2009 Status: Offline Points: 1013 |
Post Options
Thanks(0)
|
black = Beyma SB15 - SM115K grey = Beyma SB15 - SN-15LF black = Beyma SB15 - SD15 grey = Beyma SB15 - SN-15LF black = Beyma SB15 - FL-15LF grey = Beyma SB15 - SN-15LF black = Beyma SB15 - C-15LF grey = Beyma SB15 - SN-15LF |
|
KenTech
Registered User Joined: 05 December 2006 Status: Offline Points: 133 |
Post Options
Thanks(0)
|
thanx again
one more thing Ibex.. i;ve founded a very very cheap driver. at about 35 Euros. i'm curious of his plot's in SB15-1 cab. Here are the T/S parameter FS - 40 hz Re - 5.5 ohm Qes - 0.35 Qms - 2.63 Qts - 0.31 Vas - 190 L Sd - 839 cm2 Xmax - 5 mm Mms - 80 gr Bl - 19.2 Le - 1.76 Cms - 0.19 (mm/N) Rms - 7.96 (kg/s) Nominal Power - 500 W Program Power - 1000 W SPL 1w/1m - 98 db Frec. response - 40-3000 hz Voice coil diameter - 75.5 mm Voice coil material - CU Former meterial - Al Edited by KenTech - 05 July 2009 at 3:35pm |
|
Ibex
Young Croc Joined: 27 May 2009 Status: Offline Points: 1013 |
Post Options
Thanks(0)
|
black = Beyma SB15 2x - SM115K grey = ES18-BPH - C-18ELF black = Beyma SB15 2x - SD15 grey = ES18-BPH - C-18ELF |
|
KenTech
Registered User Joined: 05 December 2006 Status: Offline Points: 133 |
Post Options
Thanks(0)
|
Edited by KenTech - 05 July 2009 at 3:38pm |
|
Ibex
Young Croc Joined: 27 May 2009 Status: Offline Points: 1013 |
Post Options
Thanks(0)
|
black = Beyma SB15 2x - KenTech grey = ES18-BPH - C-18ELF looks quiet good to me too! which driver are we talking about? cheers |
|
KenTech
Registered User Joined: 05 December 2006 Status: Offline Points: 133 |
Post Options
Thanks(0)
|
it's one from Bluetech... called LW1503.
at 35E it's SH, but new is about 58-60E/piece. Please, tell me. The plot's are 1w for C18ELF and 1W for both SB15 ( 0,5W for each one ) , or 1w for each SB15 ( meaning 2w in total ). And, it's in 2 Pi ? thanx Edited by KenTech - 05 July 2009 at 3:59pm |
|
Ibex
Young Croc Joined: 27 May 2009 Status: Offline Points: 1013 |
Post Options
Thanks(0)
|
HR input data: - SB15: 1xPi (-> 2 cabs); 2,83V (-> 1W) - ES-18BPH: 2xPi (-> 1 cab); 2,83V (-> 1W) |
|
KenTech
Registered User Joined: 05 December 2006 Status: Offline Points: 133 |
Post Options
Thanks(0)
|
1w in 2 cabs, right ?
|
|
Ibex
Young Croc Joined: 27 May 2009 Status: Offline Points: 1013 |
Post Options
Thanks(0)
|
I have to disapoint you, it's unfortunately... 2W/2cabs = 2x 1W/1cab I think that was my fault |
|
Post Reply | Page <1 23456 7> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |