A Recone Guide |
Post Reply | Page <1 678910> |
Author | |
Sabbelbacke
Registered User Joined: 02 February 2010 Location: Germany Status: Offline Points: 48 |
Post Options
Thanks(0)
|
Spain is more to the west, probably the world already ended there :)
|
|
Earplug
Old Croc Joined: 03 January 2012 Location: Europe Status: Offline Points: 7199 |
Post Options
Thanks(0)
|
Spain is just to the south of me (in Cataluña at the moment) - but yes...
TBH, I´ve been kept waiting for months sometimes for a reply from some of the sound companies here - it´s very frustrating. |
|
Earplugs Are For Wimps!
|
|
Sabbelbacke
Registered User Joined: 02 February 2010 Location: Germany Status: Offline Points: 48 |
Post Options
Thanks(0)
|
@earplug
I got a message that you sent me a PN, but somehow, I can´t access and write PNs in this Forum. Maybe not enough posts ? Could you send me an email?
|
|
Earplug
Old Croc Joined: 03 January 2012 Location: Europe Status: Offline Points: 7199 |
Post Options
Thanks(0)
|
I think you need 10 posts, so just 1 to go....
|
|
Earplugs Are For Wimps!
|
|
Sabbelbacke
Registered User Joined: 02 February 2010 Location: Germany Status: Offline Points: 48 |
Post Options
Thanks(0)
|
No Problem :)
We ran out of "sticky stuff" for the surroundings, our previous supplier shut down. Does anybody have a hint for the fabric surroundings? (Yes, Beyma et all have stuff available, but its much too expensive...)
|
|
Earplug
Old Croc Joined: 03 January 2012 Location: Europe Status: Offline Points: 7199 |
Post Options
Thanks(0)
|
Earplugs Are For Wimps!
|
|
midas
Old Croc Joined: 27 October 2011 Location: Cumbria Status: Offline Points: 2117 |
Post Options
Thanks(0)
|
Now if they were in the UK that would be excellent...
|
|
Earplug
Old Croc Joined: 03 January 2012 Location: Europe Status: Offline Points: 7199 |
Post Options
Thanks(0)
|
What you need is a friend in the US who can send them on as a (tax-free) gift, etc.
Edited by Earplug - 28 December 2012 at 5:23pm |
|
Earplugs Are For Wimps!
|
|
midas
Old Croc Joined: 27 October 2011 Location: Cumbria Status: Offline Points: 2117 |
Post Options
Thanks(0)
|
I have used this before to stick a spoiler on the roof of my old Subaru, it was one of the high level rear window spoilers. I used a small bead about 5mm thick 60mm long, so not very much.
Called Sika flex, super strong cured over night.
Which was no mean feat as it was 312bhp and topped out of revs at 140mph. Is it worth trying on a cone? http://www.uksealants.co.uk/sikaflex-11fc+-adhesive-and-sealant-300ml--p209.html Edited by midas - 29 December 2012 at 12:07am |
|
Sabbelbacke
Registered User Joined: 02 February 2010 Location: Germany Status: Offline Points: 48 |
Post Options
Thanks(0)
|
I have Sikaflex here, its fine as a glue for glueing the cone to the gasket. But as a lubricant for the surrounding I´d guess it´s too thick and viscous.
|
|
Muckerbarnes1
Old Croc Joined: 20 March 2010 Location: Stroud Status: Offline Points: 2654 |
Post Options
Thanks(0)
|
I had this email ( which is global and ok to use) From Beyma today about the glus supplied ( Evo Stick), so only old kits will now have glue. Hope this helps someone; Moncada, Jannuary 10th 2013 Dear Partners, We have decided to remove the tube of glue included in the recone kits for repairing cone speakers. This decision has been taken mainly to comply with current regulations (REACH) and also because in many cases the state of the glue was not correct in the moment of repairing giving no added value to include it. Please note this component is not difficult to be found in the market. We will update the recone procedure note included in the kits as well as in the web site, indicating the type of glue that must be acquired for doing a correct job. For your reference it is contact glue, rubber type. Please do not hesitate to contact us for further information. Sincerely, Jorge Serrano |
|
Billy Dawg.
|
|
madsound
Registered User Joined: 25 March 2013 Status: Offline Points: 17 |
Post Options
Thanks(0)
|
nice post
|
|
Post Reply | Page <1 678910> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |