PKN XD4000 Test Results |
Post Reply | Page <1 4567> |
Author | |
levyte357
The 10,000 Points Club Joined: 10 May 2004 Location: UK, London Status: Offline Points: 11743 |
Post Options
Thanks(0)
|
@Lewis, did you measure current draw for 40hz test in 4 ohm stereo mode?
|
|
"Who am I? I'm the guy who does his job.. You must be the other guy".
|
|
Louder than loud
Old Croc Joined: 13 May 2010 Location: Guildford Status: Offline Points: 2377 |
Post Options
Thanks(0)
|
'' 40hz test in 4 ohm stereo mode running two pd1850 ''
|
|
abeltronics
Registered User Joined: 16 July 2009 Location: Norwich Status: Offline Points: 265 |
Post Options
Thanks(0)
|
Fraid not Ray, that's on the cards for future amp tests....
|
|
http://www.abeltronics.co.uk - Electronic Engineers
|
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
Zombie thread resurrection, in progress..
Anyone metered this amp on mains, while running full tilt, at 4 ohm stereo on sub !? |
|
Global Depopulation - Alive and Killing.
|
|
teeth
Young Croc Joined: 05 July 2021 Status: Offline Points: 561 |
Post Options
Thanks(0)
|
no but if you tell me how to do it correctly i can :]
|
|
midas
Old Croc Joined: 27 October 2011 Location: Cumbria Status: Offline Points: 2117 |
Post Options
Thanks(0)
|
I lent my 10k and 4 x turbo 21's 780L's to a mate for a night to test. Few months ago now.
Outdoors in a large tent, had to turn it down and limit it when the marquee was full, there was too much bass. The smaller 4000's sound lovely clean and clear on tops.
|
|
In bass no one can hear you scream!
|
|
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7810 |
Post Options
Thanks(0)
|
4000 is too small for driving subs.
|
|
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
Was thinking for 1x 4 ohm sub per channel. You would be suprised, how many amps with impressive specs, fail at this task. Even the illustrious Crown MA3600VZ, ran out of steam. Edited by levyte357- - 16 November 2022 at 8:29am |
|
Global Depopulation - Alive and Killing.
|
|
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Offline Points: 7441 |
Post Options
Thanks(0)
|
i've used them for 1 or 2 void loaded X1s a side for about 10 years.. they're still going strong. one cone developed a rip once so i think i'm at the limit of what i'd give them.
quite happy with the sound, was using matrix xp3000, 1 sub a side before that. |
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
I've been offered a unit, for fairly cheap price, but sceptical as a result of xd6000 performance. Trying not to go big iron, driving 4 ohm drivers.
Edited by levyte357- - 16 November 2022 at 10:15am |
|
Global Depopulation - Alive and Killing.
|
|
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Offline Points: 7441 |
Post Options
Thanks(0)
|
i've never used an xd6000. but if you don't like it.. i wouldn't expect you'd like the xd4000 so.
|
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
The xd6000 had decent power, but even though rated at 3kwpc at 4 ohms, just like Matrix XT7000MF, on sub notes, could not match Void 8MK2,only rated at 2500wpc at 4ohms. That's why I'm sceptical, regarding XD4000, reproducing rated power at 4 ohms on sub notes.
Edited by levyte357- - 16 November 2022 at 11:40am |
|
Global Depopulation - Alive and Killing.
|
|
Post Reply | Page <1 4567> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |