THE T.AMP PROLINE 3000 |
Post Reply | Page <1 2345> |
Author | ||
Cheif_Stringer_
Registered User Joined: 26 April 2016 Location: Northumberland Status: Offline Points: 119 |
Post Options
Thanks(0)
|
|
Just revisiting this...
Is it just the actual plug end that would need to be re-wired on one of this? and would a simple adapter on the end of the pre installed plug not work? Ive got a co-worker who would do it for me if sodering and stuff needs done, id just like to keep everything as hassle free as possible though |
||
DMorison
Old Croc Joined: 14 March 2007 Location: Aberdeen Status: Online Points: 1647 |
Post Options
Thanks(0)
|
|
It's easier for others to see what you're talking about if you use "quote" rather than "reply" - saves us having to read back through the thread to pick up where you're at... Anyhoo - adapters of the kind you're referring to are often not rated to handle very high current, and even if they did, would represent one extra point of (possible) failure, so don't go that route. Either use a prebuilt replacement cable or get a UK plug fitted to the existing cable by someone that knows how to wire a plug safely. (I thought everyone did, even got taught it in school but maybe I'm just showing my age now... ) HTH, David.
|
||
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
|
Otherwise, everything will all just go quiet. |
||
Global Depopulation - Alive and Killing.
|
||
Cheif_Stringer_
Registered User Joined: 26 April 2016 Location: Northumberland Status: Offline Points: 119 |
Post Options
Thanks(0)
|
|
Thanks for your reply, the plan would be to fit a new plug on the existing cable then, ill get my co worker who owns a soldering kit to do it then, if i done it id have the feeling in my head of it going quite at any point as meantioned above |
||
Cheif_Stringer_
Registered User Joined: 26 April 2016 Location: Northumberland Status: Offline Points: 119 |
Post Options
Thanks(0)
|
|
Yeah ive heard the protection is basic on these, and that and the weight is so high. That seems to be the main compromise though from all the research ive done- these seem great for running subs |
||
bob4
Old Croc Joined: 29 February 2004 Location: Finland/Germany Status: Offline Points: 1842 |
Post Options
Thanks(0)
|
|
at the power and current levels this amplifier draws from mains, the connectors should NOT be soldered, but screwed or crimped! |
||
Cheif_Stringer_
Registered User Joined: 26 April 2016 Location: Northumberland Status: Offline Points: 119 |
Post Options
Thanks(0)
|
|
Whats the correct method then? |
||
rhythmsandy
New Member Joined: 19 July 2016 Status: Offline Points: 8 |
Post Options
Thanks(0)
|
|
Is this amp better than so called Class D from Labgruppen or Crown? or may be powersoft? I mean in terms of the subsonic wave hit? I mean tightness?
|
||
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7810 |
Post Options
Thanks(0)
|
|
Subsonic?
|
||
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
||
rhythmsandy
New Member Joined: 19 July 2016 Status: Offline Points: 8 |
Post Options
Thanks(0)
|
|
read the middle post on the first page you will see how a member has described the performance.
Got to be one of the best explanation of the performance of the T.AMP PROLINE 3000 Serious amplifier. |
||
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7810 |
Post Options
Thanks(0)
|
|
You need to have a complete lack of understanding of acoustics to write such explanations.
What "hits" you is definitely not a subsonic wave. People just like to use terminology that they have no idea what that means. Subsonic is below 20Hz. That wont hit you ever. Might shake you. But that is if you ever find subs that can reproduce is at a level needed so you can feel 15hz or so.
|
||
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
||
rhythmsandy
New Member Joined: 19 July 2016 Status: Offline Points: 8 |
Post Options
Thanks(0)
|
|
I feel its just his terminology and way of expressing. Its the initial hit so that is what he is expressing. Im not..
|
||
Post Reply | Page <1 2345> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |