Spot the deliberate mistake |
Post Reply | Page <1 34567 11> |
Author | |
kedwardsleisure
Old Croc Joined: 20 January 2009 Location: Staffordshire Status: Offline Points: 4949 |
Post Options
Thanks(0)
|
This is for a DJ monitor, loud and brash is the way!
|
|
Kevin
North Staffordshire |
|
service dept Steve
Old Croc Joined: 30 January 2010 Location: S.W.London Status: Offline Points: 2034 |
Post Options
Thanks(0)
|
Like my Missus you mean? |
|
We are not "They", We are "The others"http://www.servicedept.co.uk -
|
|
Earplug
Old Croc Joined: 03 January 2012 Location: Europe Status: Offline Points: 7216 |
Post Options
Thanks(0)
|
Mistake, or upgrade?
|
|
Earplugs Are For Wimps!
|
|
mini-mad
Old Croc Joined: 13 July 2012 Location: london Status: Offline Points: 6903 |
Post Options
Thanks(0)
|
|
|
If it sounds like a gorilla is trying to escape, turn it down.
|
|
kedwardsleisure
Old Croc Joined: 20 January 2009 Location: Staffordshire Status: Offline Points: 4949 |
Post Options
Thanks(0)
|
You're all very disparaging and cynical!
|
|
Kevin
North Staffordshire |
|
GAZ.
Old Croc Joined: 16 January 2007 Location: Hertfordshire Status: Offline Points: 2433 |
Post Options
Thanks(0)
|
Hmm a guitar speaker... maybe even a 16 ohm one? What did it come in for, not sounding quite right?
|
|
100% Earth Moving Bass
|
|
kedwardsleisure
Old Croc Joined: 20 January 2009 Location: Staffordshire Status: Offline Points: 4949 |
Post Options
Thanks(0)
|
Mm, yes 15ohm actually. It had been 'for repair' to another place before it arrived here, the owner had no idea it didn't have its original driver in. The proper driver of course should be a cast chassis 8R 300W
|
|
Kevin
North Staffordshire |
|
kedwardsleisure
Old Croc Joined: 20 January 2009 Location: Staffordshire Status: Offline Points: 4949 |
Post Options
Thanks(0)
|
Crown MA5000VZ
output module The first correct guess will get a look at my halloween fairy cake |
|
Kevin
North Staffordshire |
|
burningbush
Old Croc Joined: 25 May 2009 Location: Pictland Status: Offline Points: 5897 |
Post Options
Thanks(0)
|
Is that a euphamism? I think it needs "couple more caps and diodes" in there, should make it better sounding, right???? |
|
music is the message
|
|
kedwardsleisure
Old Croc Joined: 20 January 2009 Location: Staffordshire Status: Offline Points: 4949 |
Post Options
Thanks(0)
|
|
|
Kevin
North Staffordshire |
|
RobinMatrix
Young Croc Joined: 23 August 2013 Location: Kidderminster Status: Offline Points: 567 |
Post Options
Thanks(0)
|
Missing screws in the heatsink so the whole thing is wobbling about?
Something off going on with that ribbon cable ... looks like it is plugged into fresh air? |
|
Matrix Pro Audio ::http://matrixproaudio.com/"
|
|
kedwardsleisure
Old Croc Joined: 20 January 2009 Location: Staffordshire Status: Offline Points: 4949 |
Post Options
Thanks(0)
|
One for you and three for Andy S'pose it was obvious in hindsight but since the heatsink screws connect the module to its busbars, the effect was profound, at least when one screw became jammed under the pcb.... |
|
Kevin
North Staffordshire |
|
Post Reply | Page <1 34567 11> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |