Box Coating |
Post Reply | Page 123 4> |
Author | |
bass*en*mass
Old Croc Joined: 03 September 2009 Location: "unknown" Status: Offline Points: 4009 |
Post Options
Thanks(0)
Posted: 12 May 2017 at 3:08pm |
tv00 - go lineX route?
Edited by bass*en*mass - 12 May 2017 at 3:09pm |
|
tv00
Old Croc Joined: 10 August 2009 Location: Denmark Status: Offline Points: 1886 |
Post Options
Thanks(0)
|
Well if it's lasts it's ok by me :-)
|
|
www.facebook.com/babysoundsystem
|
|
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7816 |
Post Options
Thanks(0)
|
Expensive
|
|
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|
tv00
Old Croc Joined: 10 August 2009 Location: Denmark Status: Offline Points: 1886 |
Post Options
Thanks(0)
|
www.facebook.com/babysoundsystem
|
|
SMP
Young Croc Joined: 16 March 2013 Location: East London Status: Offline Points: 1226 |
Post Options
Thanks(0)
|
unlikely as it is a specialist coating process not a paint at all. And requires special kit to apply it. I am investigating other "Cold Catalysed" types but not much headway yet waiting on a few samples
|
|
discosucks
Old Croc Joined: 06 November 2009 Status: Offline Points: 1548 |
Post Options
Thanks(0)
|
|
|
TONY.A.S.S.
Old Croc Joined: 21 February 2007 Location: United Kingdom Status: Offline Points: 6878 |
Post Options
Thanks(0)
|
Although I've never done it, I do like the Line X finish regarding consistency. Unfortunately it's not for the DIYer, as it involves someone else doing part of your job, Alright for some but not for others I guess. My 2 pack stuff will see me out.
|
|
SMP
Young Croc Joined: 16 March 2013 Location: East London Status: Offline Points: 1226 |
Post Options
Thanks(0)
|
I have finally received some Line X samples various good stuff will be coating some testers soon but seems to do the job. Although density is an issue to be investigated durability seems very good for abrasion resistance
|
|
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7816 |
Post Options
Thanks(0)
|
Chemline spray machine costs about 15K eur. Not a Chinese one that is.
|
|
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|
discosucks
Old Croc Joined: 06 November 2009 Status: Offline Points: 1548 |
Post Options
Thanks(0)
|
What's the deal with two pack paint guns?
Is it a total no no for people with no paint experience? Is it expensive to get set up ? tuffcab just doesnt do it for me anymore I really want a tough finish .
|
|
AlmostSalty
Registered User Joined: 06 June 2011 Status: Offline Points: 415 |
Post Options
Thanks(0)
|
Chemthane needs to be sprayed because of its gel-time of only a few seconds. Trying to figure out what to paint my cabs with and a full polyurethane with top coat would be real real nice. But spending all that time and money to have some idiot put there graffiti, on top of a beautiful coating would be heart breaking! Thats when having a roller for a quick touch up is a big plus and much more forgivable...
|
|
snowflake
Old Croc Joined: 29 December 2004 Location: Bristol Status: Offline Points: 3122 |
Post Options
Thanks(0)
|
just got some samples sent through of their products applied to plywood. not sure how many coats they have used. i tested each sample by hitting it quite hard a dozen times with a tack hammer and scratching the surface as hard as i could with the corner of the hammer head. tested some of my cabs for comparison tuff cab. gloss coarse stippled finish (applied by roller). obvious denting scratches clearly visible chemthane 7025 polyurethane elastomer. fine stippled gloss finish (looks like it has been sprayed on). very slight denting. scratches visible chemthane 7030 polyurethane hard coating for wood. gloss finish. no denting. scratches visible chemthane 7030/chemthane 1400 topcoat. matt finish. no denting. scratches barely visible and only if light at right angle. seems like a good product but AFAIK is has to be sprayed |
|
Post Reply | Page 123 4> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |