strange things for a woofer.... |
Post Reply | Page 12> |
Author | |
thepastor
Registered User Joined: 10 December 2009 Status: Offline Points: 100 |
Post Options
Thanks(0)
Posted: 25 January 2014 at 7:00pm |
Hi guys, we have a woofer that have strange problem.... at low volume crackles and sounds bad ... but sounds great at high volume without any disturbance ... while the other cones that do the same action (same amp, same box and same frequencies reproduced) do not exhibit this problem, a pd 186 in a box es18bph ..... did you ever? does anyone know what it could be? thanks a lot
|
|
bee
Old Croc Joined: 14 June 2011 Location: Middlesex Status: Offline Points: 4553 |
Post Options
Thanks(0)
|
when not turned on, pushing on the cone gentle, does it rub or move freely.....
|
|
https://www.elements-audio.com
|
|
thepastor
Registered User Joined: 10 December 2009 Status: Offline Points: 100 |
Post Options
Thanks(0)
|
i tried...it move freely...but depends where i put my hands to move it, sometimes i feel a slighty stuck with a slighty rubbing noise
|
|
bee
Old Croc Joined: 14 June 2011 Location: Middlesex Status: Offline Points: 4553 |
Post Options
Thanks(0)
|
if you push down, giving even pressure with fingers around dust cap, does it rub....
|
|
https://www.elements-audio.com
|
|
thepastor
Registered User Joined: 10 December 2009 Status: Offline Points: 100 |
Post Options
Thanks(0)
|
if i do it around dust cap not, if i do it from external suspension ... Yes..it rub!
Edited by thepastor - 25 January 2014 at 7:39pm |
|
bee
Old Croc Joined: 14 June 2011 Location: Middlesex Status: Offline Points: 4553 |
Post Options
Thanks(0)
|
have you taken driver out of cab and given it a good look over, checking rubber surround, etc.... |
|
https://www.elements-audio.com
|
|
thepastor
Registered User Joined: 10 December 2009 Status: Offline Points: 100 |
Post Options
Thanks(0)
|
yes i do it ...and at my eyes seems perfect....
|
|
thepastor
Registered User Joined: 10 December 2009 Status: Offline Points: 100 |
Post Options
Thanks(0)
|
of course except the noise when i move the woofer from external suspension......seems like a contact noise
Edited by thepastor - 25 January 2014 at 7:45pm |
|
bee
Old Croc Joined: 14 June 2011 Location: Middlesex Status: Offline Points: 4553 |
Post Options
Thanks(0)
|
wicked, could be the early signs of a burn coil, but its hard to say....
|
|
https://www.elements-audio.com
|
|
thepastor
Registered User Joined: 10 December 2009 Status: Offline Points: 100 |
Post Options
Thanks(0)
|
yes, i play with this woofer in this condition from one year and never failed!!!
...but now i decided to taken the driver out of his box and see what happens ... maybe is better to change it or repair it...i really don't know what to do... |
|
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7816 |
Post Options
Thanks(0)
|
Seems to me like a slightly deformed vc former that rubs a bit so it is noticeable on low power. But you dont hear it on higher level. I have had a few 12s exhibiting the same problem. Had to recone them Although they were working.
|
|
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|
thepastor
Registered User Joined: 10 December 2009 Status: Offline Points: 100 |
Post Options
Thanks(0)
|
and with the recone the problem disappeared? or can i continue to use it? in your opinion what is better considering the cost of recone?
|
|
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |