Scoop Issue (Plays deep but doesn't hit hard) |
Post Reply | Page <12345 6> |
Author | |
MINTEVENTRESOURCES
Registered User Joined: 12 April 2017 Location: USA Status: Offline Points: 59 |
Post Options
Thanks(0)
|
[QUOTE=levyte357-] [QUOTE=MINTEVENTRESOURCES]
Hello All / Lev Below are the requested measurements.
What is depth from Rear baffle to inside of front baffle, in mm? = 231.775mm What is the width from left to right, inside of chamber, in mm? = 571.5mm What is the length from top to bottom of rear baffle, in mm? = 406.4mm Is there just gap at bottom of rear baffle? if so what is height, in mm? = 174.625mm |
|
Mint Event Resources
|
|
MINTEVENTRESOURCES
Registered User Joined: 12 April 2017 Location: USA Status: Offline Points: 59 |
Post Options
Thanks(0)
|
Pictures Edited by MINTEVENTRESOURCES - 16 April 2017 at 3:14am |
|
Mint Event Resources
|
|
MINTEVENTRESOURCES
Registered User Joined: 12 April 2017 Location: USA Status: Offline Points: 59 |
Post Options
Thanks(0)
|
|
|
Mint Event Resources
|
|
MINTEVENTRESOURCES
Registered User Joined: 12 April 2017 Location: USA Status: Offline Points: 59 |
Post Options
Thanks(0)
|
|
|
Mint Event Resources
|
|
MINTEVENTRESOURCES
Registered User Joined: 12 April 2017 Location: USA Status: Offline Points: 59 |
Post Options
Thanks(0)
|
|
|
Mint Event Resources
|
|
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7816 |
Post Options
Thanks(0)
|
Hmmm, i dont see anything wrong with the box.
Maybe its the scoop sound that you are not use to. As you can see almost everyone are using them with a kick box above.
|
|
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|
MINTEVENTRESOURCES
Registered User Joined: 12 April 2017 Location: USA Status: Offline Points: 59 |
Post Options
Thanks(0)
|
I know and love the scoop sound. I am missing the pressure the kind that makes you want to run from the speaker.
|
|
Mint Event Resources
|
|
djkeet
Registered User Joined: 26 December 2011 Location: England Status: Offline Points: 462 |
Post Options
Thanks(0)
|
Well I would have thought this would be a good indicator (Considered along with TS params)of power efficiency but it appears your saying its irrelevant, so it doesn't really matter that I thought that the PD was more sensitive but also its Irrelevant that the Void is, as it has to sit in its own specific design like all subs. As far as I know there's not many people that use Void in scoops.Cheers Edited by djkeet - 16 April 2017 at 4:26pm |
|
Soundbite
|
|
MarjanM
Old Croc Joined: 10 February 2005 Location: Macedonia Status: Offline Points: 7816 |
Post Options
Thanks(0)
|
Sensitivity is always averaged from the pass band way out of operational range. In most of the cases 100-500hz.
For subwoofers you need to look at other things. QTS, VAS, BL X-max. Heavier cone drivers will have more x-max and thus shift more air. Will need more power, but that is not relevant because we are after the max spl, not the 1w spl.
|
|
Marjan Milosevic
MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |
|
Dub Specialist Sound
Old Croc Joined: 15 November 2013 Location: Smethwick Status: Offline Points: 4873 |
Post Options
Thanks(0)
|
The size of that throat is enormous man, and a strange up angle panel, imho
so its probably down to the design i aware of the top heavyweight scoops buildwith large-ish throats
|
|
Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE...
|
|
MINTEVENTRESOURCES
Registered User Joined: 12 April 2017 Location: USA Status: Offline Points: 59 |
Post Options
Thanks(0)
|
No solution Dub? Or suggestion of such? Patiently awaiting Lev's response.
|
|
Mint Event Resources
|
|
djkeet
Registered User Joined: 26 December 2011 Location: England Status: Offline Points: 462 |
Post Options
Thanks(0)
|
I've got a few scoops/and I'm comparing and thinking the same as you Dub SP the up angle panel sits low it should be more acute this design will play low freq I cannot see how your going to have your cake and eat it. Will there be any consideration to bracing in the horn mouth, is their any reason why horn plans on here or others (established) minis weren't considered first Edited by djkeet - 16 April 2017 at 5:09pm |
|
Soundbite
|
|
Post Reply | Page <12345 6> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |