Real time Analyser Software

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   sorry - on the hardware requirements, I missed a section in the README file which should interest many:

quote:

Why is there no documentation?

- Channel 1 is the output of the system we are observing (measured), channel 2 is the input (reference).  

   You also need a decent calibrated omnidrectional microphone (reasonably flat 20Hz-20kHz) and either a USB-Preamp like the 2-channel M-Audio, or a mixer with a 30dB pad or so going into the laptop mic input.  

No Pad is necessary if you are lucky enough to have a laptop or PC with a line input.  

The headphone out will have the pink noise.

............one day I'll read the instructions first!

Mik

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
audiomik Members Profile Send Private Message Find Members Posts Add to Buddy List Old Croc Joined: 06 April 2010 Location: Bath, UK Status: Offline Points: 2956	Post Options Post Reply Quote audiomik Report Post Thanks(0) Quote Reply Posted: 13 April 2010 at 9:01pm
	sorry - on the hardware requirements, I missed a section in the README file which should interest many: quote: Why is there no documentation? - Channel 1 is the output of the system we are observing (measured), channel 2 is the input (reference). You also need a decent calibrated omnidrectional microphone (reasonably flat 20Hz-20kHz) and either a USB-Preamp like the 2-channel M-Audio, or a mixer with a 30dB pad or so going into the laptop mic input. No Pad is necessary if you are lucky enough to have a laptop or PC with a line input. The headphone out will have the pink noise. ............one day I'll read the instructions first! Mik