Mini stack with novel 3-way MidTop

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

I wanted to share my first system WIP, particularly the MidTop that is somewhat based on the MT 122 design, with inspiration from the old Turbosound Flashlight and skeletal F1 variants.  It will use the following PRV Audio components that I have not heard much about on this site:

3DF750/5000 three way crossover, 450w RMS
12W750A 12" woofer 
WGP275PH 1" phenolic midrange horn
TW700Ti bullet tweeter

The MidTop drivers will be operating within their recommended frequency ranges, powered by a single channel from a 4-channel berry 6kW amp(440w RMS @8ohm per channel).  The electronic components for the MidTop were relatively cheap($220), but the build has over 30pcs.  Wife says it looks like a robot, will report on how it sounds when complete.

The HD15s will be powered the same way with 500w drivers, but the X1s will have a separate 2-channel 6kW berry amp with Eminence NSW4018-8 drivers that handle 1600w RMS @8ohm per channel   

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
hogcranker Members Profile Send Private Message Find Members Posts Add to Buddy List Registered User Joined: 13 November 2023 Status: Offline Points: 14	Post Options Post Reply Quote hogcranker Report Post Thanks(0) Quote Reply Topic: Mini stack with novel 3-way MidTop Posted: 10 January 2024 at 10:01pm
	I wanted to share my first system WIP, particularly the MidTop that is somewhat based on the MT 122 design, with inspiration from the old Turbosound Flashlight and skeletal F1 variants. It will use the following PRV Audio components that I have not heard much about on this site: 3DF750/5000 three way crossover, 450w RMS 12W750A 12" woofer WGP275PH 1" phenolic midrange horn TW700Ti bullet tweeter The MidTop drivers will be operating within their recommended frequency ranges, powered by a single channel from a 4-channel berry 6kW amp(440w RMS @8ohm per channel). The electronic components for the MidTop were relatively cheap($220), but the build has over 30pcs. Wife says it looks like a robot, will report on how it sounds when complete. The HD15s will be powered the same way with 500w drivers, but the X1s will have a separate 2-channel 6kW berry amp with Eminence NSW4018-8 drivers that handle 1600w RMS @8ohm per channel

BrainlessTekno Members Profile Send Private Message Find Members Posts Add to Buddy List Registered User Joined: 20 February 2023 Location: Slovakia Status: Offline Points: 381	Post Options Post Reply Quote BrainlessTekno Report Post Thanks(0) Quote Reply Posted: 11 January 2024 at 8:02am
	looks clean good job
	BarSick / barsik soundsystem Dont want to toot my own horn but toot toot

VECTORDJ Members Profile Send Private Message Find Members Posts Add to Buddy List Young Croc Joined: 11 June 2006 Location: United States Status: Offline Points: 585	Post Options Post Reply Quote VECTORDJ Report Post Thanks(0) Quote Reply Posted: 12 January 2024 at 11:33am
	I am from MARS....Take Me to Your Leader.