LIGWA 218-2000 Watts SubStation only 6 for sales |
Post Reply |
Author | |
LIGWA
Young Croc Joined: 18 April 2007 Location: United Kingdom Status: Offline Points: 813 |
Post Options
Thanks(0)
Posted: 17 October 2017 at 10:57pm |
http://www.ebay.co.uk/itm/182836617124?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
With carnival season over and space being very tight have six of these to get rig off. Only used one at the Notting Hill Carnival Have 6 available for Sales any questions 07984937109 Alf Dual High Output/Low Distortion Woofer with 4” Voice Coils and Kevlar Reinforced Cones 2000 W AES/6000W Peak Ultra Rugged Premium Birch Plywood Cabinet High Durability Polyuria Finish Product Description LIGWA 218SUB Dual 18” 2000 Watt, Premium Passive Subwoofer The 218SUB is a very high output, high definition, passive subwoofer designed for both portable and fixed installation applications requiring very high output at the lowest frequencies while maintaining low distortion. It is part of Ligwa’s full line of CX Series premium loudspeakers which are designed to provide unmatched sonic quality at very high sound pressure levels. Ligwa has designed the 218SUB with a two high quality 18” long excursion cast frame woofers with 4” edge wound high temperature resistant voice coils. This enables the 218SUB to produce sustained high levels of low frequency output while efficiently dissipating heat to improve long term reliability and reduce power compression. Additionally, the 218SUB woofers have specially designed Kevlar reinforced cone which provides consistent sonic performance when driven at even the highest levels. Two NL4 connectors are provided for input and loop output which are mounted into the enclosure’s recessed rear plate. The cabinet design of the 218SUB allow for quick and easy transportation and setup. Four sets of 1/4-20 threaded inserts are located on the rear of the cabinet in each of its four corners for mounting casters or other transportation hardware. Four heavy duty, powder-coated steel handles are integrated into the sides of the enclosure at its center of gravity to lower the effort of transporting and setting up the 218SUB. The enclosure is made of void-free, multi-ply Baltic birch plywood with optimized bracing to minimize resonances and improve damping. The 218SUB enclosure provides the strength and durability needed for a high degree of reliability whether it is used in portable or fixed installation applications. The 218SUB addresses a wide range of subwoofer applications from live sound to commercial installations due to its very high output, high reliability and excellent sonic characteristics. It can be used with any of the CX full range loudspeaker models to create a variety of complete and sonically matched sound systems.m |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |