Wood choice for soundsystem |
Post Reply | Page <1 345 |
Author | |
sn95
Registered User Joined: 10 March 2013 Location: USA Status: Offline Points: 351 |
Post Options
Thanks(0)
|
KMB
Registered User Joined: 02 October 2017 Location: Belgium (dutch) Status: Offline Points: 34 |
Post Options
Thanks(0)
|
Yes i have the X401 driver. So 6mm is okay instead of 6,5mm?
Thanks for the help!! And by the way, my wood is multiplex 1.8mm Edited by KMB - 05 January 2018 at 9:23am |
|
RoadRunnersDust
Young Croc Joined: 03 December 2013 Location: United Kingdom Status: Offline Points: 560 |
Post Options
Thanks(0)
|
The extra 0.5mm in the holes in the basket is for clearance else the screws wouldn’t fit.
I think you mean 18mm plywood? |
|
KMB
Registered User Joined: 02 October 2017 Location: Belgium (dutch) Status: Offline Points: 34 |
Post Options
Thanks(0)
|
Yes 18mm (1.8cm Is what i mean).
Should I pay attention to something when i mount the driver into the scoop? |
|
RoadRunnersDust
Young Croc Joined: 03 December 2013 Location: United Kingdom Status: Offline Points: 560 |
Post Options
Thanks(0)
|
If you’re talking about how to bolt it down, etc:
Get some penny washers and a spare M6 bolt to pull the t-nuts into the wood instead of hammering them in. Get some 3x12mm wood screws to put in the tangs on the tnuts to then lock them in When you go to bolt the driver in, do it like a car wheel, go round in a star pattern tightening them a little bit at a time to avoid warping the driver basket |
|
Post Reply | Page <1 345 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |