TMS-3 kick rattle |
Post Reply |
Author | |
Futendra
Registered User Joined: 28 April 2016 Location: Belgium Status: Offline Points: 276 |
Post Options
Thanks(0)
Posted: 21 February 2018 at 6:56pm |
Hi,
We have found an annoying rattle in one of our TMS-3 kick sections. The rattle dissapeared when we put pressure on a certain part of the curved piece. We solved the issue by wedging a piece of wood at the spot, which we screwed tight from the top. Now this is obviously a very bad way of solving the rattle. We think the multiplex is split at that spot, and are currently wondering how we could fix that, as replacing the curved part would be near impossible. We were thinking about drilling a hole at the exact spot, and put some epoxy or silicone there. Any thoughts? Edited by Futendra - 21 February 2018 at 7:27pm |
|
Dub Specialist Sound
Old Croc Joined: 15 November 2013 Location: Smethwick Status: Offline Points: 4873 |
Post Options
Thanks(0)
|
You could try
PU Glue which expands and fills gaps too Good luck
|
|
Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE...
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |