ultracurve pro 8024 |
Post Reply |
Author | ||
jammin75
Old Croc Joined: 08 July 2012 Location: west midlands Status: Offline Points: 2375 |
Post Options
Thanks(0)
Posted: 12 April 2018 at 11:38pm |
|
hi guys i picked up a rack and one of these was in there its in mint condition been racked since new got all booklets with it its been in storage for a few years the owner passed away i quickly powered it up the screen is on but nothing on there theres a few leds lit tried pressing but nothing i will take a pic tom any ideas ? cheers
|
||
feel the vibes !!! "Who Feels it Knows it" Strong like Lion
|
||
Conanski
Old Croc Joined: 26 January 2006 Location: Ottawa, Canada Status: Offline Points: 2543 |
Post Options
Thanks(0)
|
|
Open it up and reseat any ribbon connectors you find.
|
||
jammin75
Old Croc Joined: 08 July 2012 Location: west midlands Status: Offline Points: 2375 |
Post Options
Thanks(0)
|
|
cheers i will try later wen back from work
|
||
feel the vibes !!! "Who Feels it Knows it" Strong like Lion
|
||
bob4
Old Croc Joined: 29 February 2004 Location: Finland/Germany Status: Offline Points: 1843 |
Post Options
Thanks(0)
|
|
I was given an old ultracurve last year, It didn't work. I started a thread on here in the electro frying section, but didn't get much of a response. I replaced the internal battery, and had a peek inside, but the unit just keeps freezing and displaying weird gibberish. I did a lot of googling, but couldn't find any information on an easy cure.
It seems these units have a tendency of bricking themselves over time. And fixing them seems to be exceedingly difficult even for seasoned electronics technicians. I think someone mentioned failing timing oscillator chips or such......
Not worth the effort I suppose. I have kept my ultracurve in the hope of recycling the case for another project. |
||
jammin75
Old Croc Joined: 08 July 2012 Location: west midlands Status: Offline Points: 2375 |
Post Options
Thanks(0)
|
|
i will have a peek wen i get chance this one been in storage for a few years
|
||
feel the vibes !!! "Who Feels it Knows it" Strong like Lion
|
||
jammin75
Old Croc Joined: 08 July 2012 Location: west midlands Status: Offline Points: 2375 |
Post Options
Thanks(0)
|
|
one ribbon was not in properly now fully blowin again |
||
feel the vibes !!! "Who Feels it Knows it" Strong like Lion
|
||
Conanski
Old Croc Joined: 26 January 2006 Location: Ottawa, Canada Status: Offline Points: 2543 |
Post Options
Thanks(0)
|
|
Wohoo. Love those easy fixes.
|
||
jammin75
Old Croc Joined: 08 July 2012 Location: west midlands Status: Offline Points: 2375 |
Post Options
Thanks(0)
|
|
yes its been rackmounted from new had 1 careful lady owner from new it was clean as a whistle inside
|
||
feel the vibes !!! "Who Feels it Knows it" Strong like Lion
|
||
Jasonstry
Young Croc Joined: 11 September 2007 Location: Cannock. J11 M6 Status: Offline Points: 1367 |
Post Options
Thanks(0)
|
|
Yep, its in mint condition (it has got a hole in the middle).
|
||
Down with signatures!
|
||
jammin75
Old Croc Joined: 08 July 2012 Location: west midlands Status: Offline Points: 2375 |
Post Options
Thanks(0)
|
|
|
||
feel the vibes !!! "Who Feels it Knows it" Strong like Lion
|
||
bob4
Old Croc Joined: 29 February 2004 Location: Finland/Germany Status: Offline Points: 1843 |
Post Options
Thanks(0)
|
|
Aaaaaawha! Have to give mine a go once more, maybe i get blessed by the same miracle |
||
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |