Alternative driver for Turbo 10" horn

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Anyone know a suitable driver for TMS3 mid horns? I have 4 working LS1001 drivers but seeing as they are basically impossible for me to recone in Australia if they fail, is there a reasonable replacement around? I should also mention the horns are not in a TMS3 cabinet anymore and only need to go up to 1.2k.
Am open to slight mods of the phase plug of necessary. 

Have even considered removing dust caps on 10s and replacing with an inverted cap.

Impedance is not an issue(dont have to be 16 ohm) and being able to run them down a little lower would be nice too. 

They are going to be used in a 3 way box with dual slot loaded midbass( possibly a ppsl alignment and a decent comp above(undecided) will be controlled via ultradrive and driven by qsc gx5.

Thanks

Edited by LunchieTey - 07 May 2018 at 1:47am

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
LunchieTey Members Profile Send Private Message Find Members Posts Add to Buddy List Young Croc Joined: 06 February 2005 Location: Australia Status: Offline Points: 934	Post Options Post Reply Quote LunchieTey Report Post Thanks(0) Quote Reply Topic: Alternative driver for Turbo 10" horn Posted: 07 May 2018 at 12:56am
	Anyone know a suitable driver for TMS3 mid horns? I have 4 working LS1001 drivers but seeing as they are basically impossible for me to recone in Australia if they fail, is there a reasonable replacement around? I should also mention the horns are not in a TMS3 cabinet anymore and only need to go up to 1.2k. Am open to slight mods of the phase plug of necessary. Have even considered removing dust caps on 10s and replacing with an inverted cap. Impedance is not an issue(dont have to be 16 ohm) and being able to run them down a little lower would be nice too. They are going to be used in a 3 way box with dual slot loaded midbass( possibly a ppsl alignment and a decent comp above(undecided) will be controlled via ultradrive and driven by qsc gx5. Thanks Edited by LunchieTey - 07 May 2018 at 1:47am
	Speaker addict