Crown Macro tech 5002vz 😞😞😞 |
Post Reply |
Author | |
Kendry castro
New Member Joined: 26 May 2018 Status: Offline Points: 7 |
Post Options
Thanks(0)
Posted: 26 May 2018 at 8:33pm |
brothers I ask you please help me with this problem I have a crown amplifiers Mach 5002VZ and I want to put it at 220 vol I want someone to send me a video of what are the wires that I have to move thank you very much for your valuable time and thanks
|
|
DjLeco
Young Croc Joined: 21 April 2009 Location: Bucharest Status: Offline Points: 817 |
Post Options
Thanks(0)
|
I'm A Stupid SMART Romanian...
|
|
Kendry castro
New Member Joined: 26 May 2018 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
?I do not know which wire I have to move
|
|
DjLeco
Young Croc Joined: 21 April 2009 Location: Bucharest Status: Offline Points: 817 |
Post Options
Thanks(0)
|
You have there three groups of wires and each have his own set of names on PCB. I red circled each group of wires, group 1, group 2, group 3, all on main PCB. So for 230Vac supply we must arrange wires as it follows for each group of 3: ON GROUP ONE (first transformer) on pin P712 must be black wire on pin P711 no wire (leave it empty) on pin P724B must be blue wire on pin P707 must be black/yellow wire on pin P704 must be white wire on pin P705 must be black/green wire on pin P710 must be white/yellow wire on pin P709 must be white/green wire on pin P708 must be white/red wire on pin P703 no wire (leave it empty) on pin P701 must be grey wire on pin P700 must be grey wire on pin P702 must be green/yellow wire On GROUP 2 (middle one): on pin P713 no wire (leave it empty) on pin P714 must be white/red wire on pin P722 must be brown wire on pin P749 must be white/green wire on pin P750 must be white/yellow wire on pin P718 must be black/green wire on pin P716 must be white wire on pin P721 must be black/yellow wire on pin P719 must be black wire on pin P715 no wire (leave it empty) on pin P724A must be blue wire ON GROUP 3 (second transformer) on pin P736 must be green/yellow wire on pin P735 must be grey wire on pin P734 must be grey wire on pin P742 no wire (leave it empty) on pin P737 must be white/red wire on pin P744 must be white/green wire on pin P743 must be white/yelolow wire on pin P738 must be black/green wire on pin P739 must be white wire on pin P745 must be black/yellow wire on pin P724C must be blue wire on pin P741 no wire (leave it empty) on pin P740 must be black wire READ and watch CAREFULLY multi times this, and check multiple times too to all colours of wires to correspond/match as I wrote above: Good luck! Edited by DjLeco - 27 May 2018 at 9:49pm |
|
I'm A Stupid SMART Romanian...
|
|
spongebob
Young Croc Joined: 20 October 2010 Status: Offline Points: 1395 |
Post Options
Thanks(0)
|
I suspect this person should just take it to someone who knows what they're doing now rather than after they've messed the wiring up and blown it up.
|
|
DjLeco
Young Croc Joined: 21 April 2009 Location: Bucharest Status: Offline Points: 817 |
Post Options
Thanks(0)
|
If it will do exactly what I showed above, and no mistake, the amp will be easy configured to 230Vac
|
|
I'm A Stupid SMART Romanian...
|
|
Kendry castro
New Member Joined: 26 May 2018 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
?thank you very much brother can do it and now he is working excellent thanks again 😁😁😁😁
|
|
APC321
Young Croc Joined: 24 August 2013 Location: West Midlands Status: Online Points: 680 |
Post Options
Thanks(0)
|
What great advice you got from DjLeco!
|
|
Kendry castro
New Member Joined: 26 May 2018 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
dj leco he sent me the colors and maggie number but thank God and dj leco
Edited by Kendry castro - 28 May 2018 at 1:25pm |
|
DjLeco
Young Croc Joined: 21 April 2009 Location: Bucharest Status: Offline Points: 817 |
Post Options
Thanks(0)
|
Always with pleasure dear colleagues! I hope this will help others to configure Power Supply Settings for VZ 500x series. Is not hard!
|
|
I'm A Stupid SMART Romanian...
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |