Plans for 2x18 DR TBW100? Please help

Does anyone have enclosure plans for a standard vented, direct radiating, 2x18 for B&C TBW100 4ohm speakers. I plan on stacking the enclosures about three high with a couple standard PA tops on top of that. It's going to be for mostly heavy music like EDM Dubstep, Hiphop, Metal, Rock. I dont know much about tuning enclosures but I have tools and money. I plan on pairing the speakers with the Behringer NX6000D power amplifiers and running a sub on each channel. That way I can push the amps at most to halfway at just under 1500watts per channel at 4ohms. I heard that if you tune an enclosure to lower than a speaker is specified it will reduce it's power handling. What frequency is it best to tune a subwoofer to for edm. There is a lot of 40hz-100hz rumble and energy in EDM music and hiphop so I dont know what I should do. Recommendation please?:)

Edited by Doctajay313 - 26 October 2018 at 8:43am

I do have a dual 18 plan laying around, more like thw SB1000,bur different port configuration. Tuning around 34 Hz

I haven't build one yet, so some port adjustment would be neccesary probably. 

If you want an off the shelf design, the 18 Sound dual 18 vented box should be pretty suitable for those drivers.

Where did you get the 50 Hz from? Specs suggest 200 liters tuned to 32 Hz, there is even a graph showing -3 at 32.

Oh great, you're right!! I should have just looked at the manufacturer's website. You think those specs are for a porterd cabinet? Also, do you have any vented 2x18 enclosure plans for those specifications with good bracing for stacking enclosures?

Edited by Doctajay313 - 27 October 2018 at 7:50am