Tk discosound mono mkV |
Post Reply |
Author | |
Hepcat
New Member Joined: 05 July 2020 Location: Sussex. UK Status: Offline Points: 3 |
Post Options
Thanks(0)
Posted: 05 July 2020 at 4:39pm |
Hello all. I picked up these decks a good 5/6 years ago and they've given me good service djing a few local pubs ( apart from my first gig when a main capacitor in its built in power amp shat itself half way through lol)
Anyway I had to go it to the consul today to clean a few crackly pots and noticed I have a wire detached from the selector switch in the auto pulse sound to light, its blue with an orange trace ( I do have pictures but trying to find a image host I dont have to pay for ) Anyone know where it should go on the switch? Also does anyone have a wireing diagram for the two bulgin plugs? https://photos.app.goo.gl/3uRr4xyXTC9pm3si9
Edited by Hepcat - 05 July 2020 at 4:49pm |
|
Robbo
Old Croc Joined: 05 December 2005 Location: Shropshire Status: Offline Points: 4221 |
Post Options
Thanks(0)
|
Wiring standard for Bulgin 8 pin lighting plugs is Pin 1--Earth, Pins 2,3,4 and 5
are the switched lives for 4 channel lights and pins 7 and 8 are linked together for common Neutral. |
|
Hepcat
New Member Joined: 05 July 2020 Location: Sussex. UK Status: Offline Points: 3 |
Post Options
Thanks(0)
|
Great thanks, I'm only three channel so I'll just leave pin 5 empty
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |