ASS MX600 2" Compression drivers |
Post Reply |
Author | |
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
Posted: 06 January 2021 at 12:05pm |
Recently secured 4x ASS MX600 Mid tops, loaded with correct PD 121s and Beyma CP750 TI.
All sounds exceedingly lush, with right LMS settings. All Drivers 16 ohms. However, seems 2" Beyma Comp not quite loud enough for task.
Currently using PL4 to drive 1x comp per side, estimate amp rated at 800wpc @ 8 ohms, so approx 400wpc at 16 ohms? Considering ye olde Gearbox 2" 2446, but before that, anything else out there min sensitivity 110db? I have pair of Faital Pro HF201, should sound good over 12khz with eq, but priority here is SPL 2khz - 12.5khz. Edited by levyte357- - 06 January 2021 at 12:08pm |
|
Global Depopulation - Alive and Killing.
|
|
dj jammin
Young Croc Joined: 10 April 2010 Location: southampton Status: Offline Points: 770 |
Post Options
Thanks(0)
|
Beyma cp800ti? 112db...
|
|
Reverence Sound system
|
|
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Offline Points: 7442 |
Post Options
Thanks(0)
|
lovely tops. curious what the going rate for a pair is these days?
|
|
jbl_man
Moderator Group Joined: 12 January 2005 Location: London. Status: Offline Points: 11155 |
Post Options
Thanks(0)
|
I believe Tony fitted these with the JBL 2450 neo driver. A used pair of those would bring them back to original spec.
|
|
Be seeing you.
|
|
KDW32
Young Croc Joined: 09 April 2010 Location: Green Hell Status: Online Points: 540 |
Post Options
Thanks(0)
|
Yes first of the mx600 were fitted with jbl2450 neo. B&C DE85 Later.
Edited by KDW32 - 06 January 2021 at 9:48pm |
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
I'll see what the asking price is for these... (Gulp) Been talking to guys on FB, and have started looking for used Beyma 850ND or RCF 950ND 2". |
|
Global Depopulation - Alive and Killing.
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |