8x EV 15L - need your oppinion |
Post Reply | Page <123 |
Author | |
nebellungen
Registered User Joined: 15 August 2021 Location: GER Status: Offline Points: 10 |
Post Options
Thanks(0)
|
hey jbl_man , all my drivers are the old non proline 200 watt rms version ( at least i think) i want to wire them up in 4 ohm pairs , my amping is still a big ? , i will get to that when i finished the caps. for testing i can use 2x yamaha p1600. for all other people , i know the material i own is not nearly anywhere "pro". i just wanna have fun & a fairly good sounding rig for private parties. no need for huge bass orgies / 8x 2000 watt subs. just in it for the fun
|
|
nebellungen
Registered User Joined: 15 August 2021 Location: GER Status: Offline Points: 10 |
Post Options
Thanks(0)
|
sadly i own the old non proline models with 200 watt rms. when i buy the amp , i want to buy one that can drive 8x the pro version with 400 watts each comfy. i dont plan on killing my speakers , but if one dies , the recone kits are only aviable in the pro version so i want to plan for that. using them as subs , i will be limited by xmax anyway , or else i will just kill them fast imo. i wanna be gentle to them.
|
|
RoadRunnersDust
Young Croc Joined: 03 December 2013 Location: United Kingdom Status: Offline Points: 561 |
Post Options
Thanks(0)
|
I’ve sent you a PM if you can access them yet on this site?
Otherwise drop me a PM on facebook: www.Guildford cable company.co.uk
Edited by RoadRunnersDust - 25 August 2021 at 12:06pm |
|
nebellungen
Registered User Joined: 15 August 2021 Location: GER Status: Offline Points: 10 |
Post Options
Thanks(0)
|
ahh , right now iam on mobile because iam in the process of moving flats. i will get to it once that is finished. and thank you for your help & sharing your knowledge / experience. ! :)
Edited by nebellungen - 25 August 2021 at 4:46pm |
|
Elliot Thompson
Old Croc Joined: 02 April 2004 Location: United States Status: Offline Points: 5175 |
Post Options
Thanks(0)
|
I see I've touched a nerve because all now you haven't said if you tried it or not. Yet, you are cursing left right and center All you are saying it can't be done. Meanwhile, I've used 8 EVM 15B Series II loudspeakers on 2 QSC EX 4000 Amplifiers from 60 Hz on up from 1990's - 2000 and, never lost a driver. I retired the drivers once I upgraded to the QSC PL 6.0 and upgraded the top boxes. Argument is done. Go play Chess. Obviously, your knowledge is solely based upon reading specification sheets and, have no real world experience in regards to the EVM 15 L and EVM 15 B. Best Regards, |
|
Elliot Thompson
|
|
RoadRunnersDust
Young Croc Joined: 03 December 2013 Location: United Kingdom Status: Offline Points: 561 |
Post Options
Thanks(0)
|
No, I've never been so bloody stupid as to try it.
Why would I damage my difficult and expensive to repair equipment proving a point to ill-informed gimps on the internet?
I can fairly well guarantee that you've never actually metered the Voltage*Current function of them though so your assertation that you've delivered the power is totally baseless. Once again, go discover what crest-factor means. If you want to dick-swing about doorstops, I ran mine from an SR-707 for a long time until moving to light-weight amplifiers. Doesn't change the laws of physics. The argument was done after my first post. Everything you've said since demonstrates you haven't a clue Go cry to the admins about the swearing, pigshite being spread about by idiots is called pigshite. If they don't like it they can update the filter. Meanwhile I'll continue having fun playing with my EVMs that I apparently don't own or use |
|
turbo7
Registered User Joined: 15 March 2009 Status: Offline Points: 233 |
Post Options
Thanks(0)
|
i am not sure how much the wood increased in price at your place,
before i build cabs for those ( midrange ) drivers, i would test every speaker for magnetization, if you have one in the chain which got hits in the last decades it will not deliver the motor force and you will end up with a recone, sometimes its just better to get new drivers imo, considering the cost of the wood + manpower building them
|
|
Post Reply | Page <123 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |