powerCON TRUE1 TOP |
Post Reply |
Author | |
vertx
Young Croc Joined: 14 March 2012 Location: Sydney Status: Offline Points: 578 |
Post Options
Thanks(0)
Posted: 27 June 2022 at 4:58am |
Any reason not to use NAC3MX-W-TOP on an audio amplifier lead? Then a NAC3FX-W-TOP to whatever is needed i.e 10amp, 15amp, 20amp, outlet plug (Australia/NZ standard) for example?
|
|
James Tengo
Old Croc Joined: 09 May 2008 Location: Brighton Status: Offline Points: 2155 |
Post Options
Thanks(0)
|
Very good connectors, now found on most new led screens and lights, 16a rated and good to disconnect under load (unlike the blue and white powercon) A lot of lighting and led companies are moving over to using them instead of the bulky 16a for tidier looms.
|
|
imageoven
Old Croc Joined: 28 March 2007 Location: Scotland Status: Offline Points: 2186 |
Post Options
Thanks(0)
|
the metal spring thing that stops you opening without a tool is a PITA, is there a knack I haven't found yet? The older ones loose their locking latches too easily, but the newer version seems better.
|
|
Keep pushing on, things are gonna get better.
|
|
James Tengo
Old Croc Joined: 09 May 2008 Location: Brighton Status: Offline Points: 2155 |
Post Options
Thanks(0)
|
The knack is….. Use a tool…
Neutrik replaced a whole load of connectors that lost their yellow catches for free, the joys of buying them by the metric fuckton.
|
|
imageoven
Old Croc Joined: 28 March 2007 Location: Scotland Status: Offline Points: 2186 |
Post Options
Thanks(0)
|
I guess my tool skills aren't up to much 😄 |
|
Keep pushing on, things are gonna get better.
|
|
James Tengo
Old Croc Joined: 09 May 2008 Location: Brighton Status: Offline Points: 2155 |
Post Options
Thanks(0)
|
Small flat screwdriver inserted in the locating hole, a bit of swearing also helps….
|
|
imageoven
Old Croc Joined: 28 March 2007 Location: Scotland Status: Offline Points: 2186 |
Post Options
Thanks(0)
|
got the right tool, must need different swear words...
|
|
Keep pushing on, things are gonna get better.
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |